Typhon Typhon wing on Senton (part numbers)

[Exc3l]

Hey guys, I been reading about wings on here and most of them talk about protection of the body and downforce! I was wondering If I could get all the part numbers for mounting a wing on my Senton (now converting to Typhon). Please don't reply with "check the exploded view" because I have, I just can't figure what I need
TIA!

 

[Yonic]

Well, you need:
MT skid plate - https://www.arrma-rc.com/part/AR320401
rear bumper - https://www.arrma-rc.com/part/AR320454
the wing mount itself - https://www.arrma-rc.com/part/AR320455
the wing mount is connected to the body post - https://www.arrma-rc.com/part/AR320452
you'de also need the body posts themselves... - https://www.arrma-rc.com/part/AR320458
and of course the wing - https://www.arrma-rc.com/part/AR480016

You'de need some hardware to mount the parts.

I would also consider getting the parts from JRC, as it will have the hardware installed already and will probably be cheaper (havnt calculated but it's my guess):
wing/mount set
misc parts that contain the skids and body mounts
bumpers

 

[Exc3l]

Well, you need:
MT skid plate - https://www.arrma-rc.com/part/AR320401
rear bumper - https://www.arrma-rc.com/part/AR320454
the wing mount itself - https://www.arrma-rc.com/part/AR320455
the wing mount is connected to the body post - https://www.arrma-rc.com/part/AR320452
you'de also need the body posts themselves... - https://www.arrma-rc.com/part/AR320458
and of course the wing - https://www.arrma-rc.com/part/AR480016

You'de need some hardware to mount the parts.

I would also consider getting the parts from JRC, as it will have the hardware installed already and will probably be cheaper (havnt calculated but it's my guess):
wing/mount set
misc parts that contain the skids and body mounts
bumpers

I already have all the body posts and body!
Thanks, @Yonic for the help. I will get these ordered online ASAP! I am going to need another shelf for spares ?‍

 

[Freelander]

I dunno about Senton but the granite was easy. I did not need to switch to typhon body posts but eventually did. The wing mounts worked with the granite body mount.
You need to drill some holes in the granite body mounts for the wing mount to screw into it.