UpliFT-RC - v3 KRATON 6s Monster Truck Build Log

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Uplift-RC

TB RC Bashers
Premium Member
Excellence Award
Build Thread Contributor
Messages
1,430
Reaction score
2,427
Location
TAMPA, FL 🇺🇸
Arrma RC's
  1. Granite
  2. Infraction
  3. Kraton 6s
  4. Notorious
  5. Typhon 3s
Hi Guys, this is my first RC build log so bare with me! Here are all of the upgrades that I have installed on my 2018 ARRMA v3 6s KRATON Monster Truck so far that up to date.

T-Bone Racing
TBR - Rear Basher Bumper
TBR - Rear Flat A-Arms Skid Plates
TBR - Front Thrasher Bumper -
TBR- Rear Mud Guards
TBR - 6s Wheelie Bar


Just Bash It:
6mm Thick 7075-T651 Aluminum Shock Tower Rear (6oz)
1 Set of 4 Stainless steel 17MM Spike nuts (2oz) Installed
CRCU-AR-564 RR Hinge Pin Holder Arrma 6s


M2C RACING:
m2c 3005 ARRMA GOLIATH OUTCAST,TYPHON,SENT.,NOTOR. 6S BLX
m2c 3075 ARRMA 16 MM ZRS SHOCK CAPS AND ORING SHOCK PISTONS
m2c 3080 ARRMA SHOCK TOWER STAND OFF KIT
m2c 3055 ARRMA PILLAR BALL RETAINER NUT KIT
m2c 3076 ARRMA , KRATON,TALION, OUTCAST(SERIES) SHOCK CAP BUSHING
m2c 3102 ARRMA KRATON, OUTCAST, NOTORIOUS FRONT SHOCK TOWER

RPM Racing Products:
Front Upper & Lower A-arms for 6S versions
Mud Guards for RPM Kraton, Talion & Outcast Rear A-arms

Voltage Hobbies:
Servo Mount & Servo Clamps (Installed)
Front and Rear Skid Plates (Installed)

ARRMA PARTS
ARRMA KRATON RED BODY SHELL
ARMMA Red Aluminum Button Red bolts for (WING)
ARRMA V4 KRATON CENTER BRACE V4 Chassis Brace

SPRINGS:
Tekno TKR6083 shock springs rear - 1.6 x9.0t, 90mm Orange, 4.80 Lb/IN
Tekno TKR6093 shock springs front - 1.6 x 7.5t, 80mm orange, 6.11 LB/IN

TIRES
Dboots - Backflips
ProLine - Trenchers off-road tires
SRC: All Terrain Belted Tires

Bearings:
Jims Bearings

Servo Upgrade:
PowerHD- DW25L

Fans:
Yeah Racing Black 1/8 Aluminum Motor Heat Sink W/ Dual Cooling Fans YA-0261BK

Just Bast it - 6mm Thick 7075-T651 Aluminum Shock Tower Set
Just Bash It Shock Towers.png


TBR - Rear Flat A-Arms Skid Plates
TBR Rear A-Arms skid plates.jpeg


Voltage Hobbies Servo Mount & Servo Clamps
Voltage Hobby Servo Mount .jpeg


ARRMA V4 KRATON CENTER BRACE V4 T2T
ARRMA Center Brace .jpeg



17mm Spike wheel nuts from Just Bash it

JBI SPIKED 17MM NUTS.jpeg




ProLine Trenchers off-road tires

ProLine Trenchers.jpg

TBR Back Bumper Thraseher
TBR Tharsher Bumper Rear.jpeg



** Like me on Facebook or you can follow me on Twitter **
Facebook Page: https://www.facebook.com/Uplift-RC-23...
Twitter Account: https://twitter.com/RcUplif
 
Last edited:
Mc2 chassis will do the upgrade when I tweak my stock one since I have around $800.00 tied up into my v3 already!
Hurry up and join the 1K club! ?
 
I don't know about you all but when I have done a lot of bashing and I have had my tires let loose on me before in the past. Check it out, i picked up some new Hot Racing 17mm Serrated Dirt Shield Closed Wheel Nuts for my 6s #KRATON.
FEATURES:
  • CNC machined 6061-T6 aluminum, anodized black
  • Laser engraved HR logo
  • Rubber o-ring Friction provides sure grip
  • Capped nuts protects stub axles from dirt and protects axle ends from damage when scuffed against objects

SPECIFICATIONS:
  • Hex size: 17mm
  • Height: 7.5mm
1570241361387.png
 
Last edited:
I don't know about you all but when I have done a lot of bashing and I have had my tires let loose on me before in the past. Check it out, i picked up some new Hot Racing 17mm Serrated Dirt Shield Closed Wheel Nuts for my 6s #KRATON.
FEATURES:
  • CNC machined 6061-T6 aluminum, anodized black
  • Laser engraved HR logo
  • Rubber o-ring Friction provides sure grip
  • Capped nuts protects stub axles from dirt and protects axle ends from damage when scuffed against objects

SPECIFICATIONS:
  • Hex size: 17mm
  • Height: 7.5mm
View attachment 49974
I've lost one of these too. One drop, no more, of blue loctite on the outer thread of the hub each time you have them off. That will stop the loosening and loss of the nut. I killed three wheels before I started doing this. Too much loctite and you'll have a swear fest trying to get them off. Answer is "experience"?
 
I feel ya, I put to much of loctite on my collect on my prop and I could not get the shaft off for at least 1 hr lol... Finally i was able to get my prop off my #Sonicwake 36 inch Speed boat..lol
 

Attachments

  • Back Shot of SONICWAKE 36''.jpeg
    Back Shot of SONICWAKE 36''.jpeg
    81.5 KB · Views: 73
bicketybam, @WoodiE , @Notorious J, arrmadillo, As we all know the stock servo that came with my #ARRMA v3 are not the best in my opinion so I got the - POWER HD DW-25LV Coreless Motor 347.2 oz / .11 Titanium Gear Digital Servo...

What i really like about this Servo is the specs:

Torque(4.8V): 21.0 kg-cm (291.6 oz/in)
Torque(6.0V): 25.0 kg-cm (347.2 oz/in)
Speed: 0.13 sec (4.8V) │ 0.11 sec (6.0V)
Operating Voltage:4.8 ~ 6.0 DC Volts
Weight: 80.0 g (2.8 oz)
Bearing Type:Ball Bearing x 2
Motor Type:Coreless Motor
Gear Type:Titanium & Steel
Operating Temperature:-20℃~60℃
Working frequence:1520μs / 333hz
Size:40.0 x 20.0 x 38.8 mm ( 1.57 x 0.79 x 1.53 in)
 

Attachments

  • PowerHD.jpg
    PowerHD.jpg
    184.8 KB · Views: 58
  • Power HD  DW-25LV.jpg
    Power HD DW-25LV.jpg
    151.7 KB · Views: 70
bicketybam, @WoodiE , @Notorious J, arrmadillo, As we all know the stock servo that came with my #ARRMA v3 are not the best in my opinion so I got the - POWER HD DW-25LV Coreless Motor 347.2 oz / .11 Titanium Gear Digital Servo...

What i really like about this Servo is the specs:

Torque(4.8V): 21.0 kg-cm (291.6 oz/in)
Torque(6.0V): 25.0 kg-cm (347.2 oz/in)
Speed: 0.13 sec (4.8V) │ 0.11 sec (6.0V)
Operating Voltage:4.8 ~ 6.0 DC Volts
Weight: 80.0 g (2.8 oz)
Bearing Type:Ball Bearing x 2
Motor Type:Coreless Motor
Gear Type:Titanium & Steel
Operating Temperature:-20℃~60℃
Working frequence:1520μs / 333hz
Size:40.0 x 20.0 x 38.8 mm ( 1.57 x 0.79 x 1.53 in)
Good buy. Be sure to set your end points so you don't overload the servo. Not gonna explain, search the forum and you'll find it mentioned many times. Now go bash and come back with a great story of backflips, front flips and huge air!
 
Good buy. Be sure to set your end points so you don't overload the servo. Not gonna explain, search the forum and you'll find it mentioned many times. Now go bash and come back with a great story of backflips, front flips and huge air!
Yes sir, thats the plan!! Ones I get it installed I will do a small review vs the #ARRMA Stock Servo and the differences. Also, thanks for the update on setting my end points, its GREATLY appercaited (y)(y)
 

Attachments

  • PwrHD Servo.jpg
    PwrHD Servo.jpg
    249.2 KB · Views: 64
Last edited:
After going back and forth with a different off road tires. I wanted either the Dbotts #Copperheads or the Dboots #backflips!
After talking to a lot of #Arrma bashers, THEY said they liked the backflips the best for the for a 6s rig! They will not ballon as much as the copperhead will! Also, I should have my T-BONE Racing red front Thrasher bumper installed! More Pictures to come!!

1570981682956.png
 
No but its better then any other bumper on the market in my opinion.. Its saved my rig a few times. Cant wait to put on my red front Thrasher bumper to match up with my body!
View attachment 50757
Gotta agree to disagree then. My RPM has been indestructible, where I went through half a dozen T Bones in the same amount of tine.
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top