Outcast V3 slipper and input upgrade

[jonUF02]

I saw some info about a new configuration in the V3 slipper nut and HD input shaft upgrades. Can someone point me in the right direction for these parts? I've been ignoring my O4S for a while, slipper is loose.


I think it's AR311037 - slipper maintenance kit, which is different from AR310882 kit listed for my O4S. New part has 25mm screw vs. 20mm

And AR311031, stubby input gear to accommodate the extra large nut thing on the back of the slipper.

Can anyone validate this helps with the slipper nut coming loose issue?

 

[birdley35]

Yes that will fix most peoples problems , I've been using this setup on my outcast for a while now .Once its dialed in I've not had to touch it again.

 

[Edough13]

Yes that's the parts you want, and yes the new nut keeps that slipper set and doesn't come loose all the time like the v2 set-up.

 

[VonJarga]

Yes that's the parts you want, and yes the new nut keeps that slipper set and doesn't come loose all the time like the v2 set-up.

I've always had trouble differentiating V numbers. So Outcast 4s is V2? what V is Outcast 6s? What is V1?

Im not seeing any part AR311037. Do you have a link?

 

[Edough13]

Not sure on the 4s line what version they are on I think v2? But the 3s line is at v3 and the 6s line is at v5 (V) meaning version. Here is what you want
https://www.amainhobbies.com/arrma-slipper-clutch-maintenance-set-ara311033/p1250071

 

[VonJarga]

According to this it doesn’t look compatible with the Outcast 4s. Will it fit?

 

[Edough13]

Yeah pretty sure it's the exact same as this one, look at the compatibility it shows ALL 3s BLX models and the 4s
https://www.amainhobbies.com/arrma-3s-blx-slipper-clutch-maintenance-set-ara310882/p786313

 

[hoodsenna1983]

AR310882