Outcast V4 diff shimming or not?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Infractiondk

Fairly New Member
Messages
63
Reaction score
28
Arrma RC's
  1. Infraction
Hello
I have been looking like crazy to find some info om this. Does the v4 diffs lack shimming like the Olfers v1-3 diffs?
i thought i Saw one here on forum that you don't want to shim v4 diffs. But What is People’s choice ?
 
I've only had v4 diffs and I always shim the out side I was told with the v4 and internal shimming some times causes binding never need to shim the inside but still always check them just two shims on the gear side maybe 3 but again that's just how I've done mine.
And also the infraction and limitless have free moving bearings neither of mine needed shims but still check the play in it
 
Okay Sounds good. Maybe i should check Them anyways. Its a little confusing with all that info

rich Couldyou tell me the part nr for the shims on the outside of the diff ?
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top