Vendetta Vendetta build a few generic easy mods

[Boggs3010]

Center brace best I could come up with I could not find any smaller chassis rod ends. Slightly bigger fan on the motor ( come on Arrma ) the OEM was very small. Temporary cf on the bottom of the chassis, it scaps the pavement more then I thought. And ordered CF for a splitter, come on Arrma no splitter on the car??? Yet the holes and lip are there. Cardboard mock up in place.

Side note do not like taking things apart for a pinion swap. 26t installed and body post raised one notch to prevent body rub.

Moderators we need a Vendetta tab please.

 

[jkflow]

Just page @WoodiE and ask nicely for a 'Vendetta' tab.
Magic happens soon thereafter.

 

[WoodiE]

Just page @WoodiE and ask nicely for a 'Vendetta' tab.
Magic happens soon thereafter.

Oh oh it's magic.

 

[TSR85]

And ordered CF for a splitter, come on Arrma no splitter on the car??? Yet the holes and lip are there. Cardboard mock up in place.

I have a suspicion the felony splitter will line up mount holes and shape, but I have not confirmed. I ordered one to test out, comes Friday.

 

[Boggs3010]

I have one ( found a felony 1st ), and to big and the holes don't line up. I imagine it can be trimmed down to fit. 15 minutes later quickly done and temporary. I did not want it past the bumper btw.

 

[TheBadazz]

It would be great for someone to 3d print these. I would buy for my infraction mega.

 

[Boggs3010]

It would be great for someone to 3d print these. I would buy for my infraction mega.

Carbon one for the Vendetta hit eBay already. I am sure the Mega is next! For you.

 

[SrC]

Vendetta can probably use the added weight up front anyway. For more serious speeds that is.

 

[Boggs3010]

Vendetta can probably use the added weight up front anyway. For more serious speeds that is.

Or a cast iron splitter.

 

[Boggs3010]

Splitter tomorrow. Today rear spoiler.

 

[Boggs3010]

Had to go even bigger with the motor fan. Had thermal cut off 2x yesterday. Didn't bring my temp gun as it was only 75 outside. 40mm 3s lipo.

 

[jkflow]

You mean thermal cut-off on the ESC? Bigger motor fan does nothing for that

 

[Boggs3010]

You mean thermal cut-off on the ESC? Bigger motor fan does nothing for that

The motor felt the hottest of the 2. Next time will bring my temp gun. Thanks, working on the ESC next.
Added metal shocks 70mm front and went to add 70mm in the rear same as OEM but it appeared to lower the car. So I went with 80mm.

 

[Boggs3010]

Cf splitter and shocks.

 

[Senditrcandboat]

Cf splitter and shocks.

View attachment 188335

View attachment 188336

View attachment 188337

Where did you get the shocks?