A while back on FB, I saw someone talking about using the diff input cups from the BLX6s cars as replacements for the Voltage diff output cups - has anyone here tried this?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Ok sooooo, I got my box of Arrma goodies today for my Granite. I installed the spur gear and ran it on 2 lion batteries I went 5 minutes and I stripped another one. I was inside on the living room carpet an not back flipping it. So i took it apart again and installed another spur gear. I purchased 3 sun gears, 4 outdrive cups, and 3 spur gears. This time I noticed that the 2 screws that hold the motor in place were pretty lose. This might be something to keep an eye one. I will have to get some locktite.
Everything else on the truck seems solid. I am going to try drilling my next set of Drivecups and adding a grub screw that will apply some pressure to the flat part of the metal spline. It might be tossing $5 out the window but I am willing to try anything at this point.
It's #AR310862.
I'll say that again, my Fazon was upgraded to brushless, which more than doubled the top speed, and yet for 2 months now i havnt broke a single one.. but others break one in minutes.
Simple solution, get a pair of the metal outdrives from the blx kraton or outcast etc, the ones coming out of the rear/front pinion gears to the diff which have grub screws and use them instead. I actually have hpi ones on mine.
http://cdn.dirtcheaprc.com/wp-content/uploads/asc7134.jpg
Looks like them.
It's #AR310862.
I'll say that again, my Fazon was upgraded to brushless, which more than doubled the top speed, and yet for 2 months now i havnt broke a single one.. but others break one in minutes.
I'd say it's these ones from the vorza flux.Will they fit without modifications? Which HPI truck are the ones you're using from?
Very nice!I'd say it's these ones from the vorza flux.
https://www.amainhobbies.com/hpi-5x13x20mm-differential-pinion-gear-drive-cup-hpi103663/p158699
I originally was going to get the ones from a blx 6s as i have a kraton and outcast already but my shop only had the hpi ones, not sure if there's any size difference between the brands.
View attachment 26523
They are pretty snug fit at normal ride height so i had to make sure i got them as close to the chassis/diff as possible without binding up. If i wanted to i could probably shave a mm off the back of them to fit easier but so far so good. I don't drive it as much these days having a kraton and outcast haha.
I'd say it's these ones from the vorza flux.
https://www.amainhobbies.com/hpi-5x13x20mm-differential-pinion-gear-drive-cup-hpi103663/p158699
I originally was going to get the ones from a blx 6s as i have a kraton and outcast already but my shop only had the hpi ones, not sure if there's any size difference between the brands.
View attachment 26523
They are pretty snug fit at normal ride height so i had to make sure i got them as close to the chassis/diff as possible without binding up. If i wanted to i could probably shave a mm off the back of them to fit easier but so far so good. I don't drive it as much these days having a kraton and outcast haha.
Just some spares my buddy had lying around, only got them on the rear as i destroyed one of the originals. As far as i could find, they are hsp 85mm shocks.What Shocks U got there?
Thanks manJust some spares my buddy had lying around, only got them on the rear as i destroyed one of the originals. As far as i could find, they are hsp 85mm shocks.
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!