Vorteks Vortek boost body fit 3s Vortek?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

stevenwm

Very Active Member
Messages
1,070
Reaction score
1,858
Location
Central Valley Ca
Arrma RC's
  1. BigRock 4x4
  2. Kraton 6s
  3. Mojave
  4. Senton 3s
  5. Typhon 3s
  6. Vorteks
Good morning guys

Was wondering if the boost body is direct fit on the 3s model

TIA
 
It should. The boost is the same basic layout as the 3s line just without the center, driveshaft, front differential and front driveshaft axles. Of course the electrics are different also.
 
It should. The boost is the same basic layout as the 3s line just without the center, driveshaft, front differential and front driveshaft axles. Of course the electrics are different also.
Thanks

Looking at the bodies it seems their the same just wanted to make sure before I buy
 
Thanks

Looking at the bodies it seems their the same just wanted to make sure before I buy
I don’t have a boost but do have a 3s vorteks. So I’ve never tried it directly but have looked over the boost line and it does basically look the same as the 3s line. So yup, it ‘should’ work.
 
Thank you sir
Think I’ll grab once off Amazon... “free returns”
just in case
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top