Vorteks Vorteks MEGA LIPO

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Snakey76

Member
Messages
42
Reaction score
32
Hope everyone is doing well?
Just wondering what sort of size and power lipo with mAp you can run on the Arrma brushed systems?
 
I've run 2S 5200mAh Hoovo in my and my son's trucks for a while now. Just make sure you get a heatsink and fan for the motor, and clean and oil the motor every few packs to extend its life. Also, we always let the fans run for a couple of minutes at the end of a run to help with temps. For the ESC, just make sure to switch the jumper to Lipo. If the ESC gets hot you can add a fan to that too.
 
I've run 2S 5200mAh Hoovo in my and my son's trucks for a while now. Just make sure you get a heatsink and fan for the motor, and clean and oil the motor every few packs to extend its life. Also, we always let the fans run for a couple of minutes at the end of a run to help with temps. For the ESC, just make sure to switch the jumper to Lipo. If the ESC gets hot you can add a fan to that too.
Thank you very much and I will definitely do the cleaning and oiling 🙏
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top