Felony Well !! That escalated Quickly!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Went ahead and finished off the S7s lol
Have a few more red GPM aluminum parts hopefully arriving today !!!
front adjustable steering arms (red)
Body post stabilizers front and rear (red)
The thicker CVDs for rear …
Rear body post fixed mount (red)
6mm offset hex’s for rear (red)
It’s gonna rain for next 4 or 5 dsys ….
So might take her all apart and put the felony diff back in the rear since I’m “testing” these new tires …
I honestly liked the way it handle with the taller gear in the front ….. at least with white hoons
Will update thread !!!!!
Stilll think I need more power tho !!!!!
Any 6s motor and esc combo recommendations are appreciated…..
I always liked the castle 1717 in the ol revenge buggy !!!! It’s was stupid !!!!!!
 
Went ahead and finished off the S7s lol
Have a few more red GPM aluminum parts hopefully arriving today !!!
front adjustable steering arms (red)
Body post stabilizers front and rear (red)
The thicker CVDs for rear …
Rear body post fixed mount (red)
6mm offset hex’s for rear (red)
It’s gonna rain for next 4 or 5 dsys ….
So might take her all apart and put the felony diff back in the rear since I’m “testing” these new tires …
I honestly liked the way it handle with the taller gear in the front ….. at least with white hoons
Will update thread !!!!!
Stilll think I need more power tho !!!!!
Any 6s motor and esc combo recommendations are appreciated…..
I always liked the castle 1717 in the ol revenge buggy !!!! It’s was stupid !!!!!!
Castle combo in felony is awesome
 
The 1717 1650kv mmx8s combo. Also fun to run it on 8s. ;D I can't drift mine as well as you tho, you had a video in here earlier that was really sweet.
 
You know your getting old when you gotta read back thru your build thread to find out what you did last time she was tore apart!!!!
And more red stuff from GPM !!
Wooo
FEF1F951-95F4-4AFB-B0E7-0F1FC4C72B17.jpeg
 
Don’t know but definitely want to weigh her to see how much she weighs…..
Doesn’t “feel” much different than with all plastic as far as weight ……
Installed HR aluminum diff housing in front put all the parts in I posted picture of above …..
The rear CVDs really tightened up the rear end !!
And the +6mm rear offset deals seem to have pushed the rear tires out enuf she almost looks factory
But I don’t like the fact I can’t sink the rear wheel hexes when I tighten them ???
Makes me feel like I’m gonna lose a wheel ??? I don’t know???
I’ll align it set droop again change shock oils and give her a run on the new S5 tires
Pretty sure I’m going to reinstall the factory gearing in the rear ….
It just seamed to run better with the taller gear in the front !!
Hell I can’t remember!!!!!
Lol
 
Looks awesome, it does add weight . I added a carbon chassis and with the aluminum it added nearly 2lbs. You have about 25% more aluminum then I do.
 
Changing the gear ratio back on the rear axle will require different tore diameters, or you will just spin tires at different speeds.
Yes
However
I’ve ran like that before, and if memory serves I preferred the way it pulled the front with the taller gearing in front and all 4 same size tires …..
I’ve made several upgrades since then including running GRP tires 500k center diff fluid and have had a few sleeps but am definitely gonna try it again….
Thoughts ? Opinions ?
Yes I strategically located children to cushion possible crash 😀😀
Seems like it’s running pretty good !
Made one little change I may not have mentioned in this thread !!!
Just seeing what you guys think from this not so good vid
I can handle constructive criticism !!!!
This video was shot with factory felony gearing and 30f 100c 50r fluids and white hoons all 42/100/2.9
That just happened!!!! 💪😀
 
Last edited:
Back
Top