Felony Well !! That escalated Quickly!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Oh boy !!!!!!
I wonder what it is !!!!
Silly kid’s basketball !!!!! Uhg
84AE69F7-CC57-443D-96A8-05203949B03A.jpeg
35BFD9F9-DBC5-4D62-BC8E-2099F6EC276C.jpeg
 
1E7B62F1-F3CF-4518-99C9-A29C391F3BC0.jpeg

Holy SHITaki mushrooms 🍄!!!
It looks sooo big in my hand !
Actually that’s my youngest holding TP motor for photo op
But dude !!!!!
It should power it properly!!!!
image.jpg

It actually fits pretty snug in the freaking battery tray !!!
Ya
I should have done this looooong ago !!!
This is mo like it plus I can easily see the hex head bolts with my old eyes …

Heck @Diem Turner i havnt stopped staring at the TP motor to open the mount !!!!
Lol
 
View attachment 256704
Holy SHITaki mushrooms 🍄!!!
It looks sooo big in my hand !
Actually that’s my youngest holding TP motor for photo op
But dude !!!!!
It should power it properly!!!!
View attachment 256706
It actually fits pretty snug in the freaking battery tray !!!
Ya
I should have done this looooong ago !!!
This is mo like it plus I can easily see the hex head bolts with my old eyes …

Heck @Diem Turner i havnt stopped staring at the TP motor to open the mount !!!!
Lol
lol...I feel ya. My 5680 had the same effect on me. Wait until you open the motor mount...your wife should be very pleased with you :LOL:
 
Yes the mount is very well machined .
image.jpg
It’s challenging with 3 wippersnappers going whats this whats that ?
Oh ….. sorry dad didn’t mean to knock over all the PPS hardware!!!
Ahhhhhh
Anyhooo …..
This obviously isn’t gonna just bolt up in her….
So , am I wrong in thinking either new holes are drilled in chassis for PPS mount to accommodate for the hugeness of the TP motor Or ……
Just get a new aluminum chassis?
And different length front and or rear dog bones ?
…..
Scratching head now in deep thoughts!!!!!
I’ll never look at RC the same !
That’s fer sure !!!
image.jpg
 
Yes the mount is very well machined .
View attachment 256716 It’s challenging with 3 wippersnappers going whats this whats that ?
Oh ….. sorry dad didn’t mean to knock over all the PPS hardware!!!
Ahhhhhh
Anyhooo …..
This obviously isn’t gonna just bolt up in her….
So , am I wrong in thinking either new holes are drilled in chassis for PPS mount to accommodate for the hugeness of the TP motor Or ……
Just get a new aluminum chassis?
And different length front and or rear dog bones ?
…..
Scratching head now in deep thoughts!!!!!
I’ll never look at RC the same !
That’s fer sure !!!
View attachment 256716
lol...kids. Flip the motor mount. Then you'll have enough room for the motor.
1668646650973.jpeg
 
It’ll be a while before I can even mess with the Felonaction…
However, when you say flip the mount .
You mean .. turn the entire motor and mount around?
Meaning the motor would actually be turned around?
Rear of can towards rear of vehicle?
I honestly don't even have time to look at it .
Sorry for all the questions
RFB
 
It’ll be a while before I can even mess with the Felonaction…
However, when you say flip the mount .
You mean .. turn the entire motor and mount around?
Meaning the motor would actually be turned around?
Rear of can towards rear of vehicle?
I honestly don't even have time to look at it .
Sorry for all the questions
RFB
Prezactly. So that the motor is on the right side of the vehicle.

No worries, it's all good. :)
 
Evening peeps ,,,,,
So ….
I’ve been thinking 🤔 😃
It be silly to put all this “stuff” on a 2 yr old felony Chassis that I’ve ran as hard as can be run imo ….
Plus ….. I feel I will have suspension tuning issues if I were to use said old chassis..
So what are my options?
I of course have seen the just bash it 7075 Chassis which is like 5mm thick .
I’m sure it’s awsome !! But is it awsome for on road car trying to drift and utilize the suspension to do so while staying in the throttle as much as possible???
I’ve seen the M2c (I think) infraction chassis and I think it’s 3mm thick ?
I’ve seen ads for carbon fiber chassis ….
Uhg ….
The JBI is 264 doll hairs
The M2C is like a C note !
I like the JBI but feel it’s over kill for a tire burner ?
I’ve heard great things about M2c
They have a nice looking chassis at a more comfortable price ..
So for a fella wanting quality tire burning (shiny ) chassis, but not doing speed runs
Which freakin chassis do I start this project with ?
Link be cool !!!!!
I’m thinking M2c ?
Mostly due to price and material it’s machined of 7075
Strong but will still flex minimally imo with suspension????
Input , advice , links , coupons, personal experience….sll appreciated
 
I can't say much of anything to those chassis options. I moved from the stock chassis of my Infraction to the Scorched GT CF chassis and I don't think I'll ever use anything else again. Yes, it's expensive at $241. But it's not only beautiful, but it gives you acres and acres of real estate to work with. I'm not saying to get it, I'm just saying where my preference lies. I don't know if it would be the best choice for a street basher as I'm a bit apprehensive about thrashing things like this (I put a layer of clear plastic over the bottom side), but it's a nice piece of kit. Maybe someone else has some real world experience with the chassis you listed.
https://scorchedparts.co.uk/collect...fibre-chassis-limitless-infraction-and-felony
1668734252174.png
 
So I sent an. Email to just Bash it today asking their opinion on chassis recommendations..
I received a very informative response from Curt at just bash it
He recommended the 6061
Chassis and the JBI XLX2 angle mount .
This guy took time in responding to my questions. Gave alot of iinput and info about the Felonaction build ….
And offered any future help down the road .
I wasn’t even a customer yet and the customer service was awsome!!!
So I ordered the 6061 JBI chassis and a couple other parts this evening 😅
Can’t wait to see this chassis….
 
Last edited:
So I sent an. Email to just Bach it today asking their opinion on chassis recommendations..
I received a very informative response from Curt at just bash it
He recommended the 6061
Chassis and the JBI XLX2 angle mount .
This guy took time in responding to my questions. Gave alot of iinput and info about the Felonaction build ….
And offered any future help down the road .
I wasn’t even a customer yet and the customer service was awsome!!!
So I ordered the 6061 JBI chassis and a couple other parts this evening 😅
Can’t wait to see this chassis….
That's awesome. They seem to understand the concept of how to win over new customers. Happy to hear it :)
 
Doooh!!!!
Sheeeeeeet!!!!
I only ordered chassis and rear skids
Just bash it upgraded rears to titanium
And threw in all the JBI products pictured!
And stickers !!!!
That my friends is how you get people to buy more stuff !!!
Well, and quality of course !
Only had a second to mock up PPS mount just for my own personal satisfaction and photo op 😃
Chassis looks tits McGee for sure !!!!
AC084742-AE83-4D80-9264-267FC60E59FB.jpeg
F5FC93A2-8EB4-411C-A9FF-C5D1082DD39D.jpeg
 
Doooh!!!!
Sheeeeeeet!!!!
I only ordered chassis and rear skids
Just bash it upgraded rears to titanium
And threw in all the JBI products pictured!
And stickers !!!!
That my friends is how you get people to buy more stuff !!!
Well, and quality of course !
Only had a second to mock up PPS mount just for my own personal satisfaction and photo op 😃
Chassis looks tits McGee for sure !!!!
View attachment 257700View attachment 257701
Damn, that's a purrrty chassis!! (y)
 
Yes I think it’s pretty slick !
And super shiny!!!!!!
I’ll look at it more this evening.
The machine work looks good !
Just hope this TP motor has enuf power to propel the almost all aluminum “FELONACTION “
(pat pending)
Quick question…..
Should blue locktite be used on mounting motor mount ?
I have a tough enuf time breaking tiny hex head bolts loose with out any kind of thread locker .
Just looking for opinions.
Thanks
RFB
 
Yes I think it’s pretty slick !
And super shiny!!!!!!
I’ll look at it more this evening.
The machine work looks good !
Just hope this TP motor has enuf power to propel the almost all aluminum “FELONACTION “
(pat pending)
Quick question…..
Should blue locktite be used on mounting motor mount ?
I have a tough enuf time breaking tiny hex head bolts loose with out any kind of thread locker .
Just looking for opinions.
Thanks
RFB
Use just a tiny dab of blue on metal to metal fasteners. That'll keep stuff from vibrating loose.

Edit: That motor is going to be more than enough power. Have no worries about that.
 
Last edited:
512F8A6C-9297-4317-9EAE-CC250412F34A.jpeg
31C9B8AD-43E0-42CD-B53A-53CBFE9B517D.jpeg
F0F8A65E-CF6C-4507-A560-C304F68172C0.jpeg

I told my boys .
Dad gets 30 minutes of “Dad time “
Lol
So just seeing what she gonna look like and checking fit of The previous aluminum parts to the Just Bash It chassis.
It’s tight !
No too tight but perfect.
The area to set droop also seams like it’ll be easier to actually measure!!!!
Which of course should help dialing her in .
I don’t have my granite surface plate , but ima tell ya that chassis is flat , unlike the factory chassis that is definitely tweaked. !
This should be a rigid setup to blow tires off and drift around !!
Should provide plenty of shock and Awe!!!!
I’m still needing to get the Ti front and rear shafts from JBI
Their +6 offset rear wheel hexes
Esc mount and I’m sure I’ll come up with more !!
Kinda excited as I’ve never seen an RC with this type of motor and chassis as well as suspension? Not even seen one on a shelf much less one running….!
It may be a high dollar shiny piece of poo …
Ya….
Prolly not !!! Lol
 
Back
Top