Kraton What aftermarket bumper for Kraton 8s?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

raynist

Active Member
Messages
167
Reaction score
87
Arrma RC's
  1. BigRock 4x4
  2. Infraction
  3. Limitless
  4. Kraton 8S
  5. Kraton 6s
  6. Mojave
  7. Notorious
  8. Outcast 8s
  9. Outcast 6s
  10. Talion
  11. Typhon 6s
Seems the t-bone bumper has some problems.

I guess I could get an outcast bumper, any others?

I found this video on YouTube - not sure what bumper this is:


Thanks
Ray
 
Get a EXB bumper
 
Get a EXB bumper
8s brah :)
Seems the t-bone bumper has some problems.

I guess I could get an outcast bumper, any others?

I found this video on YouTube - not sure what bumper this is:


Thanks
Ray
Looks like a t-bone racing bumper to me.. perhaps an over seas knockoff?
 
Xmaxx bumper looks great on the K8s (my opinion). Check my bills if you would like to know how it looks like.

i have seen pictures and it does look great!

Does it do a good job of protecting the 8s or is it for looks?

do you have a link to an 8s bumper?
 
To the OP.
I read your initial post incorrectly and assumed you are looking for bumper for the kraton, not the outcast....
 
To the OP.
I read your initial post incorrectly and assumed you are looking for bumper for the kraton, not the outcast....

you read it correctly.

I am looking for a Kraton 8s bumper. I was thinking the outcast 8s number could work if nothing else is available.

I edited the title of the post to be more clear.
 
What are the problems with the t bone apart from the two front bolts coming out?
 
Seems the t-bone bumper has some problems.

I guess I could get an outcast bumper, any others?

I found this video on YouTube - not sure what bumper this is:


Thanks
Ray
I installed my O8S bumper on my K8S and it's a direct fit. You just need the bolts that go on top. It works great. Super durable. Many nose landings. No breakages. My friend did manage to break the lower suspension hinge pin on the K8S with the O8S bumper, but he doesn't know how to drive ?
The O8 bumper fits directly, no mods. The Xmaxx bumper requires mods, looks cool and does a great job of protection.

Yeah but the xmaxx bumper still relies on that front weak little K8S bumper. The Outcast bumper has way more beef to it.
 
I installed my O8S bumper on my K8S and it's a direct fit. You just need the bolts that go on top. It works great. Super durable. Many nose landings. No breakages. My friend did manage to break the lower suspension hinge pin on the K8S with the O8S bumper, but he doesn't know how to drive ?

Yeah but the xmaxx bumper still relies on that front weak little K8S bumper. The Outcast bumper has way more beef to it.

so this 1
https://www.arrma-rc.com/part/ARA320556

fits direct without any changes in de Kraton 8s?
 
so this 1
https://www.arrma-rc.com/part/ARA320556

fits direct without any changes in de Kraton 8s?
Yes, but as arrmarookie stated above, you need 4 screws to assemble the bumper, they don’t supply them.
I‘m using 3x14 cap heads because they were lying around. 3x16 may be a bit better.

Here’s a shot....

6A114C44-C797-46B3-98CC-F781E5708096.jpeg
 
Seems the t-bone bumper has some problems.

I guess I could get an outcast bumper, any others?

I found this video on YouTube - not sure what bumper this is:


Thanks
Ray
That's from POS modelbau in Germany.

Great quality. Have them on all of mine.
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top