Typhon What is the connector from the esc to the motor?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Kratonage

Active Member
Messages
127
Reaction score
65
Location
Vegas, NV
Arrma RC's
  1. Talion
The esc issues mount with arrma. Second run on my typhon and the esc fan is now missing a fan blade. What replacement esc has the same connector for the motor? Hobbywing esc max8 hopefully? Or maybe replacement esc fan?
 
The connectors between motor and esc look like "normal" 4mm bullets to me. Had the same issues with my fan, after 3rd run or so one blade was missing. found a little stone inside the esc which killed the fan.

Replaced it with a Hobbywing Fan HW86080070 (was the only fan in stock at my LHS) Not exactly the same plug, but with a sharp knife an shrink tube around it worked like charm.
 
The connectors between motor and ESC look like "normal" 4mm bullets to me. Had the same issues with my fan, after 3rd run or so one blade was missing. found a little stone inside the ESC which killed the fan.

Replaced it with a Hobbywing Fan HW86080070 (was the only fan in stock at my LHS) Not exactly the same plug, but with a sharp knife an shrink tube around it worked like charm.


Cool ill keep that in mind gatno!! Thanks for your help:cool:
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top