Kraton Wheel bearing shim part number?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Warby

"Hurry up and wait"
Premium Member
ArrmaForum Fan
Hospitality Award
Rig of the Month Winner
Build Thread Contributor
Messages
4,648
Reaction score
12,467
Location
Australia, WA.
Arrma RC's
  1. ADX-10
  2. BigRock 4x4
  3. Limitless
  4. Kraton 6s
  5. Senton 3s
  6. Senton Mega
  7. Typhon 3s
  8. Typhon 6s
  9. Infraction 4x4
I've searched the forum a bit but can't find an answer. Whats the Arrma part number for the shims between the outer wheel bearing and the hex hub? The Arrma parts diagrams don't show a shim but its definitely got them. I've just replace the bearings but 1 or 2 shims short. For my V3 6s Kraton. Looks to be roughly 8mm ID x 10mm OD.

Untitled.png
 
Last edited:
Mine didn't have any. V4 kraton

It's the first time I've the rear hubs apart on my V3. Very small shims. First side stuck to the bearing so I lost them. I wasn't expecting them to be there.
 
I wonder if the v4 didn't have any

Hmm don't know. Both V3 and V4 parts diagrams don't show any either.



Maybe I did shim them. IDK. I've got Dory's memory range.

1583581456208.png
 
Last edited:
Not aware that there are shims from stock but these are 8x12. I suse them for the input gear.
Kyosho 96773 8x12x0.2mm Precision Shims
https://www.ebay.com/p/1302862387
Don't see a reason for shims either, at least in that area. There are shims/spacers when you use adapters for 1/5 or similar but not stock.
 
8x12mm is what I use..?? See any of my build threads..?
Bashing Brian, sorry dude I know this is an old post but how do I see you build threads please...I'm currently looking at shimming my axles, as the play is unreal at the minute so as you said you used 8x12mm, I just wanna look see how many you used and what else you have going on lol

Edit ::: I found it sorry lol
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top