Bricks4Breakfast
Member
- Messages
- 11
- Reaction score
- 9
- Arrma RC's
- Senton 3s
Evening bashers and/or blasters! I recently treated myself to the Senton BLX 3S V3 and have enjoyed tinkering with it in anticipation of the batteries to arrive. Although the included 2mm and 2.5mm Allen keys have sufficed for now, following recommendations on this forum I am presently on the lookout for a more durable driver kit. The forum provides many solid leads to that effect and I am sure I will be able to source what I need.
A particular question that I still have, is which size hex driver is required to match up with the wheel hex grub screws (AR724303) - even the smallest (2mm) Allen key included with the kit appears to still be too large. The informative locked "which tools to get" thread by WoodiE mentions both 1.5mm hex and 0.050" hex as useful tools, so I suspect it is one of those. Furthermore, would anyone happen to know if the Senton uses both 1.5mm and 0.050", or would I only require one of these in addition to the 2mm and 2.5mm?
A particular question that I still have, is which size hex driver is required to match up with the wheel hex grub screws (AR724303) - even the smallest (2mm) Allen key included with the kit appears to still be too large. The informative locked "which tools to get" thread by WoodiE mentions both 1.5mm hex and 0.050" hex as useful tools, so I suspect it is one of those. Furthermore, would anyone happen to know if the Senton uses both 1.5mm and 0.050", or would I only require one of these in addition to the 2mm and 2.5mm?
Last edited: