Granite Which spektrum receiver for upgrade with DX5C?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

wayne93117

Fairly New Member
Messages
18
Reaction score
16
Arrma RC's
  1. Granite
Which Spektrum receiver do I need to buy for my Granite so that it is compatible with the DX5C? Someone told me the stock one is on a different protocol.

Not looking for the fanciest, just something easy to install and plug/play.

Prob need something that is ok for the occasional rain shower/mud as well.

SR6100AT?

Thanks!
 
Last edited:
Any of these will work :
https://spektrumrc.com/Surface/Receivers.aspx

I use the 315 (no AVC), 215 will work but has no room to grow if you ever need an aux or a 3rd port for power.
6100AT will not fit in the stock receiver box, only halfway upside down sideways or some mods needed. there are other threads on that topic.
 
Any DSMR will work. I have 3 RCs and have the DX5C running all of them. Make sure they are surface receivers. One receiver is a SR6100AT which has AVC built in, I have it in my Typhon!
My IMEX Dart XB Brushless 1/18 is running SR215
My WLToys K989 Is running the SR410
You can mount the SR6100AT to the side of the receiver box, when you bind it, you will have to go through the calibration. I burned out a servo because I didn't calibrate it. I mounted mine sideways in the Typhon 3S.
 
as previous post, any DSMR will do you can literally pick and chose what you can get ...

SR210/310
SR215/315/515
SR2000

I got a variety of receivers in my trucks - in-fact you can even use a DSM2 if you wanted to
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top