Typhon Will this 20t pinion work on Typhon 3s?
- Thread starter TwinTurbo95
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
OleManTan
Member
I finally upgraded my pinion. Went with a Robinson racing hardened 17t at my lhs. Was a cool upgrade from 15t. Went to the lhs to get my buddy one and they only had 16t and 19t so I made him get the 19t. After seeing that thing rip on a $15 50c 5200mah 3s I needed more. I use 80c 5.2kmah which last longer, same brand.
Instead of paying another $25-$20 for one gear, I ordered one of those hardened five packs online. I had a mishap with the 21t set screw getting stuck so I put on the 20t. Proper ripper. I also bought a $4 plug n play set of headlights and tail lights for night time. He also bought a set of hoons and they wore out in one day. I went through about four sets already. Run mostly on pavement. Grass is too tall. Gravel is too rough. Rips up the tires and destroys driveshafts. Mulch same thing. Sand is fun but gets everything dirty kinda like mulch. He added a hr twister 40mmx28mm fan but it doesn't seem to be able to do anything. I'm running stock fan plus a spare esc fan that I screwed on to the side of the heatsink. My factory pinion looks like shark fins. Still worked just sounded funny.
Instead of paying another $25-$20 for one gear, I ordered one of those hardened five packs online. I had a mishap with the 21t set screw getting stuck so I put on the 20t. Proper ripper. I also bought a $4 plug n play set of headlights and tail lights for night time. He also bought a set of hoons and they wore out in one day. I went through about four sets already. Run mostly on pavement. Grass is too tall. Gravel is too rough. Rips up the tires and destroys driveshafts. Mulch same thing. Sand is fun but gets everything dirty kinda like mulch. He added a hr twister 40mmx28mm fan but it doesn't seem to be able to do anything. I'm running stock fan plus a spare esc fan that I screwed on to the side of the heatsink. My factory pinion looks like shark fins. Still worked just sounded funny.
Last edited:
DuderMcGavin
Fairly New Member
- Messages
- 4
- Reaction score
- 0
Can't wait til my 20t gear gets here. Everyone says it's like an entire upgrade.
Velodromed
Snatching defeat from the jaws of victory!
Premium Member
Excellence Award
Build Thread Contributor
- Messages
- 7,758
- Reaction score
- 13,924
- Location
- San Antonio, TX
- Arrma RC's
- BigRock 4x4
- Granite
- Kraton 6s
- Kraton 4s
- Notorious
- Outcast 4s
- Vorteks
- Voltage
- Infraction 4x4
I just got one of these. It works great.
ARRMA AR310876 Pinion Gear 20T 0.8 Mod 4x4 BLX 3S https://www.amazon.com/dp/B07GR34GTP/ref=cm_sw_r_cp_api_glt_i_64H3PQRJRJVQZ49RA9S4
rcNOLA
Member
- Messages
- 41
- Reaction score
- 46
- Arrma RC's
- Kraton EXB
- Typhon 3s
You have a roughly 25 percent slower take off with a 20t.
