Talion Wing brace

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Coopsonthefarm

Active Member
Messages
63
Reaction score
216
Location
Kauai
Arrma RC's
  1. Talion
I’m on the pursuit of bulletproofing my Talion. These at the the braces I have made. I made the wing brace after getting sick of snapping the wing off. I also made a little push rod slicking out of my chassis brace so my chassis dirt/dust shroud dosnt make contact with my servo horn. Any and all tips or suggestions are always appreciated.
 

Attachments

  • 29FFF800-B1CB-4C69-8F55-BEBFD15690CE.jpeg
    29FFF800-B1CB-4C69-8F55-BEBFD15690CE.jpeg
    243.7 KB · Views: 66
  • 25765FBB-B2F5-4182-BDD0-9575E8365022.jpeg
    25765FBB-B2F5-4182-BDD0-9575E8365022.jpeg
    301.2 KB · Views: 59
  • 90298F75-A3A5-48D7-91F5-EF450476D3BF.jpeg
    90298F75-A3A5-48D7-91F5-EF450476D3BF.jpeg
    239.7 KB · Views: 62
  • 1A17F66A-1365-4669-86DA-0D7FCD10B309.jpeg
    1A17F66A-1365-4669-86DA-0D7FCD10B309.jpeg
    274.2 KB · Views: 52
  • A20C0BAA-8F91-44D6-B9C4-51D76ABF8E0C.jpeg
    A20C0BAA-8F91-44D6-B9C4-51D76ABF8E0C.jpeg
    262.4 KB · Views: 60
That's a pretty beefy wing brace @Coopsonthefarm. Have you thought about upgrading to the RPM wing mount as well?

For most of the users here, running the RPM wing mount has fixed their wing mount breaking issue.
I have not yet but next break will be ordering one, happen to have a stock back up so I’ll see how long this one will hold up
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top