Typhon Wobbling/shaking wheel

[Typhon6smax]

Hi guys!

I just took my first ride with my Typhon 6s and i noticed my right front wheel is wobbling a bit. It seems more loose than the other wheels. I tried tightening up the wheel nuts, didn't really help. It seems like the cvd arm is a bit loose and i can't tighten it up anymore. For now, it doesn't seem really bad, but i don't want to ruin my rc.

So if anyone has some thoughts what if could be, please let me know!

Thanks!

 

[GMballistic]

Check;

• Wheel roundness (check it is round and not misshapen)
• Front hub nuts (red aluminium nuts on hubs which tighten onto pivot balls)
• Wheel hex (red aluminium that the wheel fits on/nuts tighten onto)
• Wheel nuts

If all that is good continue checking screws/fixings, bearings in hubs etc. Basically it is an elimination process until you find the problem/fault.

 

[Typhon6smax]

Check;

• Wheel roundness (check it is round and not misshapen)
• Front hub nuts (red aluminium nuts on hubs which tighten onto pivot balls)
• Wheel hex (red aluminium that the wheel fits on/nuts tighten onto)
• Wheel nuts

If all that is good continue checking screws/fixings, bearings in hubs etc. Basically it is an elimination process until you find the problem/fault.

If i look at the wheel nut, opposed to my wheel, it doesn't seem to move. So i think i need a new wheel hex.

Thanks for your help!