Infraction 3s infraction Centre brace

[djrick]

Hi there I’m after the Centre brace for my 3 s infraction blx but can’t find the pet number or where to buy from thanks for your help

 

[SrC]

I never seen one before on the All Road 1/8 line 4x4's. Looks like the F/R T2T mounts are there however.
I checked the blow up diagram, I don't see it. The Chassis length is unique to these if I am correct.
Not sure if you can use one from the 4s 4x4 chassis'. Maybe. May just need some trimmig to length IDK..
Do you really need it anyway?
You are not sending it 20 feet up, are you?
Perhaps an Upgrade brand has them? Below is for the Kraton 4s 4x4 chassis. It is longer than the OC 4s 4x4 chassis. Check what size you need. Get the longer one. To Trim down. I doubt that both of these will be a drop in or plug and play. I could be wrong.
But it can be fitted with some trimming.


https://jennysrc.com/collections/kr...n-4s-4x4-red-center-brace-bar-265mm-ara4408v2

 

[AddictedtoRCs]

This is what I have on my mega converted to brushless 4s

https://www.ebay.com/itm/Carbon-Fib...p4429486.m46890.l6249&mkrid=711-127632-2357-0

 

[handzace]

I never seen one before on the All Road 1/8 line 4x4's. Looks like the F/R T2T mounts are there however.
I checked the blow up diagram, I don't see it. The Chassis length is unique to these if I am correct.
Not sure if you can use one from the 4s 4x4 chassis'. Maybe. May just need some trimmig to length IDK..
Do you really need it anyway?
You are not sending it 20 feet up, are you?
Perhaps an Upgrade brand has them? Below is for the Kraton 4s 4x4 chassis. It is longer than the OC 4s 4x4 chassis. Check what size you need. Get the longer one. To Trim down. I doubt that both of these will be a drop in or plug and play. I could be wrong.
But it can be fitted with some trimming.


https://jennysrc.com/collections/kr...n-4s-4x4-red-center-brace-bar-265mm-ara4408v2

Hi there I’m after the Centre brace for my 3 s infraction blx but can’t find the pet number or where to buy from thanks for

Following

 

[SrC]

^^^ someone who knows.

 

[morrjr71]

I have a carbon fiber one I bought on Ebay.

https://www.ebay.com/itm/3346292450...q9kXMsWLJuOjf8NGcj4KiGlfyQ==|tkp:BFBMtqK-6Jti

 

[SrC]

My question is do you really need the T2T brace at all?? Not like you are sending it 20 ft high. Big air and all.
It just adds some weight. And "Cool Trick Looks" maybe? IDK.
This is not the heavier alloy'ed chassis platform like a 1/7 Lim, Fel or Infr to begin with.
But what works for you I guess.
I thought many were actually removing the T2T altogether if anything. Maybe I missed something?