walking_target
Active Member
- Messages
- 130
- Reaction score
- 118
- Arrma RC's
- Kraton EXB
- Talion
Started off life as a Mojave V2 and has been completely rebuilt using lots of EXB and other quality parts.
The only thing I haven’t done recently is the diffs - happy to check and service them before sale at the buyers preference.
Fantastic truck and performs brilliantly.
Am selling as I have too many cars and I need to thin down the collection.
HobbyWing Max6 ESC
HobbyWing 4985 1650kv motor with 23T pinion
PowerHD 25KG servo
Spektrum SLT3 radio and receiver - virtually brand new
Dual fans and heat sink on the motor
Method RC wheels x 4 - used once
Stock wheels in great condition painted grey
Scorched RC fenders
EXB shell which has been drywall taped and glued with Gorilla crystal clear grab adhesive - only been used once. I have removed the drivers/fans but can supply them
Standard shell in great condition - again, drywall taped and Gorilla’d
EXB chassis
EXB braces
EXB shock towers
EXB Ackerman steering bar and proper bearing upgrade
EXB upper hinge pin holder
EXB servo mount
M2C ESC plate
M2C extended hubs and wheel nuts
CRCU carbon fibre top plate
JBI / CRCU battery straps
POS rear mud guards
BigFoot motor wire tidies
Lots of screws changed to stainless
Have a couple spares I can throw in as well
Will be given a thorough clean and GT85 prior to sale.
Build thread at https://www.arrmaforum.com/threads/mojave-v2-exb-build.46614/
Does not come with the box (didn’t come with it when I bought it).
Due to the weight and size, I suspect it is going to be around £30-40 to ship by a reputable courier. I will get a quote when agreeing the sale. Collection available from south Northumberland (Morpeth). Happy to deliver within 20-30 miles if that helps.
Looking for £700 but open to sensible offers.
Payment ideally via bank transfer. Happy to do PayPal but buyer pays fees for G&S. I will do F&F at your risk - but that’s your decision.
No returns due to the nature of the hobby.
Very happy to take questions and chat on DM as required.
The only thing I haven’t done recently is the diffs - happy to check and service them before sale at the buyers preference.
Fantastic truck and performs brilliantly.
Am selling as I have too many cars and I need to thin down the collection.
HobbyWing Max6 ESC
HobbyWing 4985 1650kv motor with 23T pinion
PowerHD 25KG servo
Spektrum SLT3 radio and receiver - virtually brand new
Dual fans and heat sink on the motor
Method RC wheels x 4 - used once
Stock wheels in great condition painted grey
Scorched RC fenders
EXB shell which has been drywall taped and glued with Gorilla crystal clear grab adhesive - only been used once. I have removed the drivers/fans but can supply them
Standard shell in great condition - again, drywall taped and Gorilla’d
EXB chassis
EXB braces
EXB shock towers
EXB Ackerman steering bar and proper bearing upgrade
EXB upper hinge pin holder
EXB servo mount
M2C ESC plate
M2C extended hubs and wheel nuts
CRCU carbon fibre top plate
JBI / CRCU battery straps
POS rear mud guards
BigFoot motor wire tidies
Lots of screws changed to stainless
Have a couple spares I can throw in as well
Will be given a thorough clean and GT85 prior to sale.
Build thread at https://www.arrmaforum.com/threads/mojave-v2-exb-build.46614/
Does not come with the box (didn’t come with it when I bought it).
Due to the weight and size, I suspect it is going to be around £30-40 to ship by a reputable courier. I will get a quote when agreeing the sale. Collection available from south Northumberland (Morpeth). Happy to deliver within 20-30 miles if that helps.
Looking for £700 but open to sensible offers.
Payment ideally via bank transfer. Happy to do PayPal but buyer pays fees for G&S. I will do F&F at your risk - but that’s your decision.
No returns due to the nature of the hobby.
Very happy to take questions and chat on DM as required.