- Messages
- 4,737
- Reaction score
- 6,615
- Location
- San Antonio TX
- Arrma RC's
- Felony
- Granite
- Infraction
- Kraton 8S
- Mojave EXB
- Outcast 8s
- Typhon 6s
I have two Mojave EXB trucks. They are so damn durable that you only need one.
Parts upgraded : JBI Ackerman plate, M2C rear hinge pin block system, basher queen center brace and ESC mount , FlySky FS-GT5 6CH TX and RX, firma ESC and motor from Felony/6s trucks, lots of life left on the tires, 3D RC front and back rear bumper supports, hot Racing servo horn, brand new blue painted body that I never ran.
The only issues I see : it needs an antenna tube (if I find one at the LHS, I'll probably install it today, the chassis has wear from usage, but it's not bent, the upper and Lowe control arms have a dent on them (I hit a concrete plates by mistake). It's just cosmetic though. I will include the lower control arm. The power switch on the ESC is functional, but it lost the cover. I will include one that I cut from another firma ESC. I put back the 16t stock pinion so that temps stay in check. I also installed brand new bearings on the hubs and I haven't ran it since.
Any questions just PM me. I would probably have to go to FedEx or UPS ground to see how much they want.
Parts upgraded : JBI Ackerman plate, M2C rear hinge pin block system, basher queen center brace and ESC mount , FlySky FS-GT5 6CH TX and RX, firma ESC and motor from Felony/6s trucks, lots of life left on the tires, 3D RC front and back rear bumper supports, hot Racing servo horn, brand new blue painted body that I never ran.
The only issues I see : it needs an antenna tube (if I find one at the LHS, I'll probably install it today, the chassis has wear from usage, but it's not bent, the upper and Lowe control arms have a dent on them (I hit a concrete plates by mistake). It's just cosmetic though. I will include the lower control arm. The power switch on the ESC is functional, but it lost the cover. I will include one that I cut from another firma ESC. I put back the 16t stock pinion so that temps stay in check. I also installed brand new bearings on the hubs and I haven't ran it since.
Any questions just PM me. I would probably have to go to FedEx or UPS ground to see how much they want.