heatsink

There are a few threads floating around that provide some solutions to the best heatsink (and fan fit) for the Limitless. I wanted to do a fresh call out to see if anyone has found an 'off the shelf' solution recently for the Castle 1717 fit. I'm mid build and looking for the best solution at...

I started modifying an 8s heatsink to fit the Castle 1717, but as i was sliding it on/off I noticed that it was wearing the paint on the heatsink in just a few small places, which indicated to me that it wasn't getting good contact for heat transfer. Since the 1717 can has built-in fins, I...

Hi all, I am gonna buy the Kraton EXB Roller. I bought the Arrma BLX 2050KV 4074 3/4 Pin first but cannot seem to find an adequate heatsink. its diameter is 41.7mm Will a 44mm heatsink work? or will it be too loose? or maybe i can tighten it a bit by hand...

Just wanted to get an idea for the best fan setup for the above mentioned combo. I see the Ntf, and Dust Devil combos which are on the expensive side for sure. What I guess I wanna know is are they worth the money or do you guys have other options that work fine without breaking the bank...

I recently installed a Castle Creations 1717 (1650KV) motor with a Mamba Monster X 8s ESC. My questions are: Do you know of any heatsinks that fit this motor? Do you know of any fans that would fit on your recommended heatsinks? For context- I’m running a Tekno 20t pinion and the factory...

I am planning on buying new, bigger, heavier tires for my kraton - will I need to gear down to an 11T pinion? I already have a Hobbywing motor heatsink and fan

Hi guys I’ve just got the infraction and keen to get a heatsink and fan combo for it to keep the motor running cool as much as possible. does anyone have a link to a set up I can buy for it please ? It’s the standard motor in there. Heatsink and either a big single or dual fans wanted for...

Drill some holes in the body and glue some insect screen on the inside of the body.....

Hi everybody what is the best enter the hobbyWing motor fan c4 and the yeah racing twin ? Thanks

Hi, I bought a couple of this for when my CC 1410 motors arrive, and I have them mounted on a heatsink on a 550 motor. The fit is good, but they are really flimsy and the fan is going to die quickly I'm sure. Anyone have a good heatsink and/or fan solution for 1410/36xy motors? Heatsink...

I ordered this: https://www.amazon.com/gp/product/B01NB9IZTI I'm running a 3500kv brushless system with a 2S 50C 5000mAh LiPO. Is it worth it? There's already a fan on the ESC.

I'm looking for a heatsink for my motor! Does anyone know of any brands but yeah racing that make 40+ mm set ups?

Would like to here an see what heat sink fan combos are being used on v2 talions.