Typhon BLX100 LED codes

[LipoShirly]

Quick Question: Does the BLX100 status LED blink red when the battery hits LVC ? I've spent the last 30 minutes looking for what I thought would be easy to find.... is there not a published list of error/status codes for the BLX100 ESCs ? The programming codes are pretty well documented by ARRMA and the YouTubers, and the manual does mention the ESC LED will blink GREEN when an over temp error has occurred.

 

[Edough13]

Pretty sure it's listed in the manual on the same page as ESC settings or the next page. But yes I believe solid red is LVC, green is thermal cutoff. Also if the car stops and will only allow the wheels to turn from the servo it is thermal, if you can drive still but at only like 25% power it is LVC and blinking red is loss of signal to transmitter

 

[Kla912000]

Here ya go

 

[LipoShirly]

Here ya go

View attachment 153637View attachment 153638

I dug out the paper manuals when I got home, I still cant find anything. Where did you find this?

Pretty sure it's listed in the manual on the same page as ESC settings

The Temp warning is listed there, but nothing about LVC...

 

[Kla912000]

I dug out the paper manuals when I got home, I still cant find anything. Where did you find this?

The Temp warning is listed there, but nothing about LVC...View attachment 153687

On the Hobbywing site. The BLX100 is just a rebranded Hobbywing ESC.

 

[LipoShirly]

On the Hobbywing site. The BLX100 is just a rebranded Hobbywing ESC.

Ahhhh, found it. Thanks.

 

[Kla912000]

Ahhhh, found it. Thanks.

 

[Andybra]

What is the Hobbywing equivalent number? OK Found it Max 10 (limited Programming)