Kraton Diff Gear Ground into Chassis?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

NitroStar

Active Member
Messages
91
Reaction score
46
Arrma RC's
I'm taking my Kraton apart and switching chassis to M2C Racing, putting in a set if Fast Eddie Bearings, rebuilding diffs, etc. I took the front diff off and it appears that the ring gear ground into the chassis at some point. All the teeth look good and I cannot find any crack in the diff housing. It was not making any noise. It hasn't been run many times either. Anybody else ever noticed this?
20190203_175234.jpg
 
It's pretty common for any one of the three diff to make contact with the chassis if it's taken some hard hits while bashing.

It's that high pitched screeching noise you hear for a split second when you lawn dart one into the ground on a botched landing.

IMG_8875.JPG
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top