Outcast Gearing questions

[Matt_060983$]

I am running the 16T pinion stock spur & 80w Front, 500,000 Cntr & 30w rear & cant get the front wheels to stay on the ground. Standing Backflips are too easy. lol any recommendations to tame this Beast just a little?

 

[LibertyMKiii]

Reduce the weight in the center diff

some comments in this older thread might be helpful:

https://www.arrmaforum.com/threads/outcast-diff-oil-setup-discussion.4497/

 

[olds97_lss]

I must be less aggressive on the throttle. I run 100/500/100 with strapped trenchers... could be that I ran 14T for a while then just dropped to 13T due to overheating the esc. Less wheel speed. May end up on 12T if heat continues to be an issue.

 

[2fast4u]

I am running the 16T pinion stock spur & 80w Front, 500,000 Cntr & 30w rear & cant get the front wheels to stay on the ground. Standing Backflips are too easy. lol any recommendations to tame this Beast just a little?

You can try turning the punch setting down. Or dial the left index finger back a bit. Or as mentioned, revert to lighter center diff fluid. Personally I prefer the second option.

 

[Bri26]

I would try dropping the center diff weight to 300K or even 100K (if you want to do away with the wheelie all together).

Brian