Typhon HELP on pause mode

[Kingleo619]

Ok so I have a typhon 6s currently running mmx 2200. eb48 has Tekin RX8/2050kv both are 1/8 ok ok but not sure what rig gets the hobbywing xr8 plus 1900 combo?
Is there any advantages to typhon/tekno getting that system help me out.


Typhon is 46/16 stupid fast / hobbywing upgrade will be18t
Tekno 82p/25t dumb fast/ hobbywing upgrade will be 18

 

[Mongoose]

I’d stick with the RX8/2050 combo in the Tekno. It’s lighter and requires less torque than the Typhon so the higher KV motor would be best suited in it. Plus, the ESC spot on the Tekno was literally designed for the Tekin.

I’d also keep the MMX in the Typhon but swap in the 1900kv motor.

 

[Kingleo619]

I’d stick with the RX8/2050 combo in the Tekno. It’s lighter and requires less torque than the Typhon so the higher KV motor would be best suited in it. Plus, the ESC spot on the Tekno was literally designed for the Tekin.

I’d also keep the MMX in the Typhon but swap in the 1900kv motor.

I’d blow the paint off and driveshaft off if I installed the hobbywing setup?

 

[Mongoose]

I’d blow the paint off and driveshaft off if I installed the hobbywing setup?

No, not at all. It’s just better suited out of the options you have. Any combo in either of them will work.

 

[Kingleo619]

No, not at all. It’s just better suited out of the options you have. Any combo in either of them will work.

Oh ok still waiting on more reply’s and thoughts, is always have a replacement esc lol. The tekin esc is used system when i bought it