SOLD / FOUND Laegendary Sonic 1/16 and Holyton 9205E 1/10 (Clean)

[Ginglehopper]

I have two clean rc cars for sale. They are fully ready-to-run, and run great. You get what you see.

-$130 OBO for both shipped to the lower 48.
or
-$65 OBO for 1/16 shipped to the lower 48.
-$85 OBO for 1/10 shipped to the lower 48.

Shoot me any offers and/or trades.

PM me if interested.

---

First is a RTR 1/10 Holyton 9205E brushed truggy with a lot of spares.

-(2) 1800mah 2s lipos
-(1) usb charger
-3d printed front a-arms
-3d printed camber links
-3d printed turnbuckles
-LED headlights
-Spare parts bag (shocks, diff parts, turnbuckles, arms, camber links, spur gears, towers, body posts, tools, wheel hexs, wheel nuts, screws, battery cover, steering blocks, and more that I probably missed. See pictures for reference.
-Transmitter w/ batteries
-Missing the rear wing
-Scratches and screw holes on the body where I installed roof skids
-Tiny melt spot on body where I heated the roof skids

---

Next is a RTR 1/16 Laegendary Sonic - Patriot brushed monster truck.

-Upgraded rear metal dogbones
-(1) extra rear plastic dogbone
-(2) brand new 1000mah 2s lipos
-(2) brand new usb chargers
-3d printed battery cover for transmitter
-LED headlights
-Transmitter w/ batteries
-Dual connector so you can run (2) 2s batteries at the same time, doubling the mah, doubling the run time.
-I don't have the stock body, the current body came off a Bezgar 6 which is just a rebrand, same exact truck.

 

[Ginglehopper]

Bump!

 

[Ginglehopper]

Am I asking too much? I just want to get rid of them and get a little money back, but not sure about the price point because there aren't many used ones for sale.

 

[Doom!]

Prices seem reasonable to me. If I had kids I'd take 'em, but my cats haven't mastered holding the remotes yet.

 

[Ginglehopper]

Prices seem reasonable to me. If I had kids I'd take 'em, but my cats haven't mastered holding the remotes yet.

That would be something to see.

I figured most people on here don't want smaller rc's. I guess I'll wait and see.

Thanks!

 

[Ginglehopper]

Bump

 

[Ginglehopper]

Bumpitiy

 

[Doom!]

Seriously, no takers? These look like they would be great starters.

 

[Ginglehopper]

Seriously, no takers? These look like they would be great starters.

Hmmmm.... I'm thinking about putting them on offerup. I just don't like dealing with all the scammers and dumb people on there.

 

[Starfox2005]

I like the look of them but just can't put that much into another rig. GLWS Edit: I do have some interest in the 1/16 though.

 

[Ginglehopper]

I like the look of them but just can't put that much into another rig. GLWS

Okay, thanks!

 

[Ginglehopper]

I like the look of them but just can't put that much into another rig. GLWS Edit: I do have some interest in the 1/16 though.

Just saw your edit. Sorry. Feel free to ask any questions and pm me when you're ready.

 

[Ginglehopper]

bump

 

[Ginglehopper]

bump

 

[*420+3RC*]

Hey man im sure lots say this but I'd be interested if they still around in little over a week. My boys b day. Hows getting parts? Its cool if so considering they will be cheaper to work on but do they break alot? Stupid question maybe. And a YES is ok won't really deter me. Lol

 

[Ginglehopper]

Hey man im sure lots say this but I'd be interested if they still around in little over a week. My boys b day. Hows getting parts? Its cool if so considering they will be cheaper to work on but do they break alot? Stupid question maybe. And a YES is ok won't really deter me. Lol

The 1/16 scale doesn't break that much because it's so light. You have to really beat on them. Same with most other 1/16 like the redcat volcano.

Parts are easy to find for the 1/16. Many upgrades. You can upgrade to all metal driveline, brushless motor and esc, paddel tires, etc.
https://laegendary.com/collections/sonic-1-16

The 1/10 is a little heavier, but also very strong. I have broken it by wheeling my senton full speed into it. Broke a front a-arm, and snapped a cvd at the joint . I 3d printed an arm in a flexible material, and bought all the parts you see off Amazon for like $30. I haven't tested the 3d printed a-arm much, so there is a chance it could be weaker, but there are tons of spares.

Parts are a little harder to find for this, but this is what I found. You can also use DEERC 9200E parts, they are the same truck.
https://www.amazon.com/Holyton-Spare-Accessories-9205E-Speed/dp/B08HH1F49V
https://www.amazon.com/DEERC-Spare-...21-20&linkId=28dca3b14365eeced7bf894a26fc465c

I just checked the battery levels and voltages, they still look good!

Edit: I can hold it for you if you want.

 

[*420+3RC*]

The 1/16 scale doesn't break that much because it's so light. You have to really beat on them. Same with most other 1/16 like the redcat volcano.

Parts are easy to find for the 1/16. Many upgrades. You can upgrade to all metal driveline, brushless motor and esc, paddel tires, etc.
https://laegendary.com/collections/sonic-1-16

The 1/10 is a little heavier, but also very strong. I have broken it by wheeling my senton full speed into it. Broke a front a-arm, and snapped a cvd at the joint . I 3d printed an arm in a flexible material, and bought all the parts you see off Amazon for like $30. I haven't tested the 3d printed a-arm much, so there is a chance it could be weaker, but there are tons of spares.

Parts are a little harder to find for this, but this is what I found. You can also use DEERC 9200E parts, they are the same truck.
https://www.amazon.com/Holyton-Spare-Accessories-9205E-Speed/dp/B08HH1F49V
https://www.amazon.com/DEERC-Spare-...21-20&linkId=28dca3b14365eeced7bf894a26fc465c

I just checked the battery levels and voltages, they still look good!

Edit: I can hold it for you if you want.

I would hate to ask you to hold them. But I will. Yea man for sure will get them then. Cool. It'll give me a little time to learn about them more.

**Also u see the used to be friend that got me into this. He had a mini-t brushless. It would rip and tough as nails.

 

[Ginglehopper]

I would hate to ask you to hold them. But I will. Yea man for sure will get them then. Cool. It'll give me a little time to learn about them more.

**Also u see the used to be friend that got me into this. He had a mini-t brushless. It would rip and tough as nails.

Sound's good! My 1/16 redcat volcano is guarding them for you. Just pm me whenever your ready. I'm gonna sell this too sometime. I just need to replace the chassis. It is fully upgraded, just no ESC/receiver or servo.

 

[*420+3RC*]

Sound's good! My 1/16 redcat volcano is guarding them for you. Just pm me whenever your ready. I'm gonna sell this too sometime. I just need to replace the chassis. It is fully upgraded, just no ESC/receiver or servo.
View attachment 176407

Oh man!! Thats awesome looking. What u gonna look to get outa the Volcano?? Would u have a guestamate on how much the parts it needs be? I actually was looking at those for a while.

 

[Ginglehopper]

Oh man!! Thats awesome looking. What u gonna look to get outa the Volcano?? Would u have a guestamate on how much the parts it needs be? I actually was looking at those for a while.

Yeah, i'm gonna buy my friend's, he has a stock one, and one for parts. I'll sell the stock one to my other friend, then use the one for parts to fix it up. When it's ready and done, I could probably sell it for around $100-$125 with about 3/4 of a stock redcat. Here is the build thread on it, I gave up on it though.