Outcast Outcast 6S EXB Spektrum AVC (Active Vehicle Control)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

GeneralTyphon

Premium Member!
Premium Member
Messages
216
Reaction score
418
Location
Maine
Arrma RC's
  1. Outcast EXB
  2. Typhon 3s
How to I adjust or disable the AVC on an Outcast 6S EXB?

I've tried using the Spektrum Smart ESC Programming Update Box SPMXCA200 but there are no options for AVC.

Thanks
 
How to I adjust or disable the AVC on an Outcast 6S EXB?

I've tried using the Spektrum Smart ESC Programming Update Box SPMXCA200 but there are no options for AVC.

Thanks
Should be on the transmitter.

AVC is in the receiver not the ESC.
 
While powering up the rig, click the receiver button 3 times within 1.5 seconds, then you have to rebind your remote.
 
I personally don’t like or feel avc is needed on the outcast

I swapped for a 30$ slt3 /sr315 off Jenny’s
and used the avc set up for something else
 
Very good to know, it's in the controller. I didn't get a manual with this one. Probably find it online. Thank you kindly for pointing me in the correct direction gentleman.
 
Spektrum AVC is within the Receiver. And for bashing and big Air, only works against you. AVC is best for Speed running.
A plain simple Standalone Gyro is best if you want Steering stability control.
AVC is tempermental anyway. From my Exper. anyway.
The Model and Radio manuals are at Arrma-RC.com. Download it. It is your Bible.
Will answer many questions if you read it well. Will help you mantain your rig with vital info., if you are new to Arrma products. A must read IMHO.
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top