Kraton Pinion Gears

[Mboss]

Has anyone used these pinion gears before? I know the recommended pinion of choice is Tekno or Robinson....but figured I'd ask. I will be using this on my Kraton 6s (15T or 16T)....currently running 14t on stock electronics with Badlands....looking for some more top end.

https://www.amazon.com/Pinion-Screw...=8-1-spons&keywords=15t+pinion+gear+5mm&psc=1

 

[GMballistic]

If you want a 16T pinion why risk a possible inferior metal made one instead of the genuine Arrma made 16T pinion gear as used on the Typhon?
Link: https://www.amazon.com/Arrma-AR3104...UTF8&qid=1549921501&sr=8-1&keywords=arrma+16t

 

[Sledgehog]

4 pinions for the cost of one good one? Remember the RC motto: Buy cheap, buy twice.
I would just figure out what size you want and go with the tekno. $10 for a quality pinion isn't exactly breaking the bank and will save you future headache. Just my opinion though.

 

[2fast4u]

+ 2 on the Tekno. In my experience they outlast the others by a bunch. The bigger grub screw is a plus also.

 

[Mboss]

Thanks...that was my inclination (go tekno)...better quality and bigger grub screw.

 

[Sledgehog]

I replaced my stock talion 13t and got a 16t both tekno and they are beefy as heck. Would highly recommend them. Totally worth the money.

 

[joostin420]

I stick with Robinson, Tekno, and g-made which are all hardened.