AaronF
Active Member
Hi guys,
I just completed the minimal BLX upgrade to my MEGA, got the Spektrum 3200kv motor and BLX100 ESC with slipper clutch and all the required bits from Jenny's.
The motor has a cooling fin and fan on it but no where to plug it in, the ESC has a fan with a connector. Do I need a splitter to split the power from the ESC fan?
Like this
After doing the upgrade, what a massive difference! I'm only running 2S Lipo's because that's all I have. It has to be twice as fast now and will do back flips without too much trouble.
I have a 3S 2200mh for my helicopter so I'll give that a try.
//Unrelated to thread parts list.
Parts list for anyone who is interested, pro tip you'll need that bag of screws if you want to keep your brushed assembly together, I still had to borrow 1 screw from the brushed assembly since there were only 2 in the pack. Got a set of spare control arms while I was there. Shipping was 2 weeks to the day to NZ.
I just completed the minimal BLX upgrade to my MEGA, got the Spektrum 3200kv motor and BLX100 ESC with slipper clutch and all the required bits from Jenny's.
The motor has a cooling fin and fan on it but no where to plug it in, the ESC has a fan with a connector. Do I need a splitter to split the power from the ESC fan?
Like this
After doing the upgrade, what a massive difference! I'm only running 2S Lipo's because that's all I have. It has to be twice as fast now and will do back flips without too much trouble.
I have a 3S 2200mh for my helicopter so I'll give that a try.
//Unrelated to thread parts list.
Parts list for anyone who is interested, pro tip you'll need that bag of screws if you want to keep your brushed assembly together, I still had to borrow 1 screw from the brushed assembly since there were only 2 in the pack. Got a set of spare control arms while I was there. Shipping was 2 weeks to the day to NZ.