Typhon Truggied my Typhon now ESC is f’d

[ryanbarrysmac]

I did the following mods. Ran three times with an 18t pinion she got a little hot about 155 so I switched to a 16t and she ran at 120-130 full 6000mah battery pack no issues now I get this

Sorry red blinking light on ESC and slow blinking light on rx

 

[jschlosser0405]

Is that a stock servo? May have just died. Unplug servo/plug a different one in and turn car on. See if you have the same issue.

 

[fish]

I did the following mods. Ran three times with an 18t pinion she got a little hot about 155 so I switched to a 16t and she ran at 120-130 full 6000mah battery pack no issues now I get this

View attachment 227449

View attachment 227451
Sorry red blinking light on ESC and slow blinking light on rx

Ive been running a 6S Typhon Trugguy 20t pinion, for weeks now. Running on Grass fields and pavement.
Motor's been running at 145-175+ on 6S 100C.
ESC temps were lower at around 125-140 degrees F.

Just put a HS/Fan on it and dropped the pinion to 18t.

I had the ESC go nuts the other day. Not working. A new 35kg servo shorted out and was stopping the ESC from starting. Weird.

 

[Kingleo619]

Lower spur to 46 or 40 snd gear up accordingly
I was geared 46/20 and 40/25-29
worked great with no issues after 20 but definitely cool down time still no issues.

Now im currently 34/34 8s 1650 motor doesn't get warm until 6 passes later 2 cool down times and of course i street bash/speed runs only.

Lower spur gear will help i ran into same issue on my typhon when it was 6s heat issues irritated the fk out of me.

 

[ryanbarrysmac]

Is that a stock servo? May have just died. Unplug servo/plug a different one in and turn car on. See if you have the same issue.

Yes it’s a stock Servo

 

[ryanbarrysmac]

Ok, I tried everything under the sun nothing worked.

Since I still had steering and the chimes on startup I ended up recalibrating the ESC and abracadabra she’s back up and running just fine!