HEEEELLLPP ME

I don't have a fury, but I do have a Raider XL which is pretty much the same car. I also have 20+ sets of 1/8 buggy tires. They handle & wear much better than any type of 1/10 tire. So when I found that adapter I instantly bought all the different sizes to see which adaptor was needed for the several 1/10 cars I have. The adapter above works well with the Raider XL. The front didn't need shims while the rear needed 2 teflon shims on each axle.

@Megasty awesome man thanks and did you drill your axles out to fit the larger pin on those adapters?

Check out what the prolines did to my control arms


Just noticed that don't know what the hell i can do about that?
I am changing the grease around my diffs on all my trucks and inside the yeti transmission someone recommended me full synthetic (thinner black) grease from valvoline and it just liquefies and runs everywhere. So I am changing all my trucks to lucas red and tacky. Do you have any experience with any different/better tacky performance ish grease in your vehicles? This stuff is real thick so I'm using it sparingly and I don't drive in wet conditions.. everywhere I have researched is red and tacky or marine grease. again thanks for letting me pick your brain.. I try to ask the guys at my local hobby shop questions and they don't want to give anyone the time of day it's sad really..

I didn't like the 0 offset of the Trenchers so I used 17mm hex extensions. They are 23mm long. They come in 23mm & 30mm. I never ran it w/o the extensions so I didn't run into that problem. As for grease, I use to run thick marine grease but the much cheaper red hi-temp bearing grease works just as well so now I swear by the stuff. I pack it inside sealed diff housing until it's about half way full & lather tranny gears until they're mostly covered. Thinner grease is a huge no-no for your situation & it don't stick to the gears.

Yeah thankfully I caught it in time I don't get to drive them as much as I'd like to but i put some in the non sealed diffs of our brushless dromida's and that stuff was everywhere so I quickly started this tear down I haven't ran a pack through this yeti yet really ticks me off i have issue after issue with 1500+ in it like a dumb dumb
You say red high temp are you talking about lucas red and tacky?