Stretched Offroad Typhon lol

How are those metal arms? Notice any improvements in handling? Any downsides?

I like them, a lot actually, the only downside to it are the droop screw's.
They walk out while driving, so you can either put some blue Loctite on it, or once set you put a nut on top to counter and secure it that way, since the 6S changed the droop location upside down I bought the old style and swapped them out so I can adjust it from the top.

I'm gonna try them on a speed build I'm working on to add a little weight to the front end. I think I've got some M2C droop screws too. Might swap those in or just use a sockethead screw. Thanks for the info.

No Problem Bro

One last thing,,,are the droop screws for the metal arms M3 or M4? I can tell they're GPM but I wanna make sure I buy the right size screws to replace the droop screws

@9G said:

One last thing,,,are the droop screws for the metal arms M3 or M4? I can tell they're GPM but I wanna make sure I buy the right size screws to replace the droop screws

Click to expand...

M4 but they running real loose just so you know, they measure 3.5mm
https://www.ebay.com/itm/401914927569

I will use blue Loctite so I can adjust it when needed, because even the counter nut I put on is loose and I lost one, it was tight.

Thinking about "splurging" on these:

https://www.avidrc.com/product/5/ac...Screws-8th-Scale-4pcs-AV1813-accessories.html

I like that they're threaded on the sides. Might give a better grip.

The link I send you are threaded ones, they just used a stock photo

I was gonna look for the ones that have only the ID hex in it not the button hex