Media added by shane

Navigation

Media comments

• 

  Dif issue

  I see, thanks!

  • Yesterday at 4:30 PM
• 

  Halloween dif

  Powder coat ?

  • Yesterday at 12:06 PM
• 

  Dif issue

  jbull250 said:

  Can you clean all that out with some acetone and reuse the parts? Or are they usually no good once they get this hot with the plastics? I've only ever stripped them before myself.

  Click to expand...

  You should be able to reuse the metal bits after cleaning it with acetone and the bearing would need to be...

  • Yesterday at 10:42 AM
• 

  Dif issue

  Can you clean all that out with some acetone and reuse the parts? Or are they usually no good once they get this hot with the plastics? I've only ever stripped them before myself.

  • Wednesday at 5:44 PM
• 

  Dif issue

  Looks like oil leaked out and everything overheated. Or, it overheated even with oil in it, and the heat caused pressure to build up and break the gasket seal; causing further heat destruction. Solution? Aluminum diff cups wih thicker viscosity diff oil.

  • Tuesday at 10:40 PM