12mm hex hubs w/6mm center hole diameter..?

[Budha]

Hey Guys,

I ordered 2 sets of wheels in the wrong hex size - lol.

Rather than pay return shipping, I’m trying to find 12mm hex hubs that will fit an old Losi Ten-T (converted to electric). They have 6mm stub axles and seems most hex hubs are for 5mm axles.

Anyone know of any 12mm hex hub options that will work on the old Losi 10 series?

Thanks!

 

[slick2500]

Hey Guys,

I ordered 2 sets of wheels in the wrong hex size - lol.

Rather than pay return shipping, I’m trying to find 12mm hex hubs that will fit an old Losi Ten-T (converted to electric). They have 6mm stub axles and seems most hex hubs are for 5mm axles.

Anyone know of any 12mm hex hub options that will work on the old Losi 10 series?

Thanks!

Easy fix use normal 12mm hexes and drill them out with a 6mm drill bit.

 

[Budha]

Easy fix use normal 12mm hexes and drill them out with a 6mm drill bit.

Yeah - I was thinking that as well - lol.

 

[slick2500]

Yeah - I was thinking that as well - lol.

It works, I've done it a few times with great success. But I went from 4mm to 5mm, going from 5mm to 6mm should have the same results. But iirc the Arrma Granite 4x4 12mm hexes are 6mm. https://www.agf-rc.com/45kg-0085sec...-programmable-bls-servo-a81bhmw-p4706301.html

My digital calipers say the stub axles are 6mm.

 

[Budha]

It works, I've done it a few times with great success. But I went from 4mm to 5mm, going from 5mm to 6mm should have the same results. But iirc the Arrma Granite 4x4 12mm hexes are 6mm. https://www.agf-rc.com/45kg-0085sec...-programmable-bls-servo-a81bhmw-p4706301.html

My digital calipers say the stub axles are 6mm.

Super helpful - I’ll give it a shot, and if not - I’ll drill out some 5mm hex’s