rockync7
Active Member
- Messages
- 152
- Reaction score
- 156
- Location
- Goldsboro,NC
- Arrma RC's
- BigRock
- Felony
- Granite
- Limitless
- Kraton 4s
- Typhon 6s
- Typhon 3s
i have 2 6s typhons, i ordered the V3 typhon 3s, i know my older typhons 3s would leak at the shocks so these new seal should help, does anyone know of a better and stiffer shock with a threaded end to replace these poorly made shocks? Turnigy 1/8 7075 threaded body shocks i was told are good but cant find them available online.
I also have a tyhpon 3s running BLX 6S system, burned out the spur gear and ordered a steel one, anything else I might add to stiffen up the gears for the future?
I also run a Typhon street with 34/34 pinion and spool from a limitless, Castle 1515 motor and Mamba 8s ESC. Hoons as the GRP just rip off. is this a good high speed ration or should I run a smaller pinion like a 29 tooth for higher speeds?
I also have a tyhpon 3s running BLX 6S system, burned out the spur gear and ordered a steel one, anything else I might add to stiffen up the gears for the future?
I also run a Typhon street with 34/34 pinion and spool from a limitless, Castle 1515 motor and Mamba 8s ESC. Hoons as the GRP just rip off. is this a good high speed ration or should I run a smaller pinion like a 29 tooth for higher speeds?