Limitless Can't decide on a servo.

[Warby]

I need a servo for my Limitless V2 speed run build. I will be running a XLX2 ESC. I don't want to spend any more than about $200($135usd) max (including postage).

Was considering one of these as I have a ebay gift card to use, so it will cost me $0.

Or should I keep saving for a Perfect Pass Monster ?

Any other suggestions for my budget are welcome. I've read Savox servos are overpriced and noisy.
I need torque and good centering, not necessarily a fast servo.


And yes I know there are already 100,000++ threads on this exact topic, asking the same question, but here's another. Your welcome . I'm after up-to-date info and experiences. Experiences and opinions change over time.

Thank you.

 

[BashTillBroken]

I like the perfect pass servo one thing is use a servo saver made the mistake of not using one a burned up the motor inside of jt
Arrma limitless has one build in though so you should be fine

 

[cancelthefuture]

I have a Savox 2274 in my Infraction I really like. I tried cheap servos but centering is more important on a fast on road car to me. Plus you're talking about running a minimum 800 dollar car with high end electronics, put a nice servo in there
I would prioritize speed over torque for a limitless as well. 25kg is more than enough torque wise. I didn't think the stock servo even really needed more torque, but it was dreadfully slow.

 

[nomis38]

Well based upon my experience I agree that speed and centering are the main things, anything over 20 or 25kg torque is more than enough to move these tiny tires. I have a wide range as it's just stuff I had on hand from other builds. But i'd say $60 to $100 should do ya just fine. I run all mine at 8.4v

Servos I use in my limitless/felony/infraction:
2x JX BLSHV7032MG - 0.07sec / 60 ° @ 8.4v - 32kg
1x MKS X6 HBL 599 Ti - 0.08sec / 60 ° @ 8.4v - 42kg
2x KST BLS915 V.8.0 : Handbrake - 0.07sec / 60 ° @ 8.4v - 25kg