Typhon Lost screw - need help

[matflat]

Hello Fellow Arma Enthusiasts.

So I did a bad thing and lost two screws. I am stripping back my Typhon to top up the fluids and give it a clean-down. It seems that in my haste I have lost the screws for the rear suspension (top and bottom screws) and I can't tell from the exploded view on the Arrma site which part number they are, or indeed which replacement screw I can go looking for at the local hardware store.

I think it's AR721316 3mmx16mm button head - but not completely sure.

Any help would be really appreciated.

Many thanks,
Mat.

 

[Cypher]

From what I can read on the exploded view, it looks like you are correct

 

[matflat]

From what I can read on the exploded view, it looks like you are correct

@Cypher much obliged kind sir

 

[Cypher]

Seems like there is a washer aswell. AR709003
You have this still?

 

[matflat]

@Cypher - good catch. Nope I have lost that as well.

 

[palmryde]

@Cypher - good catch. Nope I have lost that as well.

You need something
like this going forward
https://www.harborfreight.com/hardware/magnets/parts-trays.html

 

[SrC]

I actually found 3mm x16mm "Socket" heads at The Home depot. Not sure if you have a THD there in Africa.
Socket head screws are better than "button heads" and will be fine and better also. Socket heads have a 2.5mm hex, button heads only have 2.0 mm hexes. Button heads have a shallow hex and strip much more easily. Socket heads have a deeper hex. Food for thought.