I was getting tired of my Granite BLX rolling and flipping on turns so I found a way to lower it since I really don't need the ground clearance. I don't run it in rough terrain too much. The front shocks are shorter than the rear. I had an extra set of front shocks from my wrecked Big Rock and put them on the rear. On the front I repositioned the lower shock mounts more outboard on the lower control arm. I drilled 5/32" holes about 7/8" outboard of the original holes in the lower control arms and moved the shocks to the outer holes. Shorter shocks for the front would probably be better but I will give this a try. Bumper height is now about 7/8" lower front and rear. I have not run it like this yet so I am not sure how its going to work out yet.