Typhon Motor slipping

[Vortek83]

I have a typhen 3s in the motor keeps slipping away from the spur gear don't matter how hard I tighten the screw no matter what I do somehow someway the motor keeps pushing itself away from the spur gear how do I get that to stop

 

[Xpress..]

It's possible your screws are loosening, in which case you may need to clean the threads out of both the screw and the motor, and clean the entire mating surface for both. Normally I would suggest loctite for this application but it's not really needed in this application, and besides you will want to unbolt the motor easily. It might not be a bad idea to replace the screws, the motor mount, and rotate the motor and mount it using a different set of mounting holes.

 

[Vortek83]

Thank you much. Your said rotate the motor. What exactly do you mean by that? You mean have the motor go the opposite way?

 

[slick2500]

Are you using blue thread lock on the screws and letting it set for 24 hours prior to use?

Thank you much. Your said rotate the motor. What exactly do you mean by that? You mean have the motor go the opposite way?

He means turn the motor so you can use the other 2 holes.