Received my EXB Super Basher front bumper from Horizon today (finally) and replaced the RPM front bumper on my Talion.
As it comes in the package:
Three pieces ... and no hardware - so you better have some M3 button/flat heads and M4 flat heads in your parts bin available:
First step was to take off the RPM bumper and then replace M4X12 flat head screws that were removed when the RPM bumper was installed. You also have to remove the M3 button head screw that goes into the suspension mount with M3x20 flat head screws:
The shock absorber piece can then be attached (or you can do it after the bumper is installed):
Also had to steal 3 of the M4x16 flat head screws from the RPM bumper.
Compared to the RPM bumper (both on Talions):
As it comes in the package:
Three pieces ... and no hardware - so you better have some M3 button/flat heads and M4 flat heads in your parts bin available:
First step was to take off the RPM bumper and then replace M4X12 flat head screws that were removed when the RPM bumper was installed. You also have to remove the M3 button head screw that goes into the suspension mount with M3x20 flat head screws:
The shock absorber piece can then be attached (or you can do it after the bumper is installed):
Also had to steal 3 of the M4x16 flat head screws from the RPM bumper.
Compared to the RPM bumper (both on Talions):