Eemeli Haaslahti
Fairly New Member
- Messages
- 14
- Reaction score
- 4
Can someone tell me what is going on here why is the controller wheel controlling the fan speed and turning the car off?!
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
It was driving fine for a while and then it just died do esc probably?You most likely have plugs in the wrong ports on your RX and you need to configure your TX. That or your ESC is 1/2 shot..
Something is shot. Time to troubleshoot. Grab a different RX first, then grab a different ESC. You don't have to install anything, just unplug and plug in new electronics on the side one at a time.It was driving fine for a while and then it just died do esc probably?
Yes i have a very small weak servo will that do?Sounds like your servo is the problem. If it’s seized up inside and you try to turn the wheel, it could be drawing a lot of power causing your fan to slow down. Sometimes it might be drawing so much power that it causes the esc to just shut down.
Do you have different servo to plug in and test?
They have pills for that......bwhahahahaha j/k....Couldn't resist!Yes i have a very small weak servo will that do?
Yea I would just use the weak servo to test to make sure it’s actually the servo causing other problems.Yes i have a very small weak servo will that do?
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!