Second update, I received the turnbuckles in the mail today. They are definitely 5mm. Too big for the stock rod ends. I have email them again in hopes of getting something for free since their website was clearly mislabeled.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
That Blows!! Hopefully they make it right.Second update, I received the turnbuckles in the mail today. They are definitely 5mm. Too big for the stock rod ends. I have email them again in hopes of getting something for free since their website was clearly mislabeled.
Doubt it is hard if you drill it slight bigger I’d go with metric bitsa few mm in length is no big deal due to the adjustability, the nature of them, threaded on both ends. The thickness change of 1mm is kind of a big deal. It's hard to fit a 4mm thread in a 3mm rod. It can stretch and be done, but not ideal. I don't know about a 5mm rod in a 4mm plastic piece. Mathmatecially the ratio is closer than 4mm / 3mm.
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!