Kraton 1/8 scale Kraton Exb 6s

[J_hero6]

I have a 1/8 scale Arrma Kraton 6s Exb and I don’t know what diff oil to run in it. Instruction manual says 80k/100k/80k but I am running a 80k/500k/80k. Any problems with what I am running now?

 

[cancelthefuture]

I have a 1/8 scale Arrma Kraton 6s Exb and I don’t know what diff oil to run in it. Instruction manual says 80k/100k/80k but I am running a 80k/500k/80k. Any problems with what I am running now?

That's fine, it's all personal preference. I never thought 100k was enough for center diff.

 

[icephase]

I'm running 50k/500k/20k with a rear open diff

 

[parcou]

I have a 1/8 scale Arrma Kraton 6s Exb and I don’t know what diff oil to run in it. Instruction manual says 80k/100k/80k but I am running a 80k/500k/80k. Any problems with what I am running now?

As stated, it is a personal call

But a classic set is would be 50/500/20k for open diffs

Now I hate the 50/500/20k, so I would rather go 50/200/20k. 200k in the center keeps it from standing up and wheeling so much...if that is your thing, go for it. I would rather launch low off the line, keep the front down more, and let the 200k in the center slip to bleed off some of that power and not stand it up.

Test and try to find your feel.

 

[RC Steve]

10/500/30 all diffs are open. The 500k in the center is to save the rear diff from my 1650kv Hobbywing.

 

[hobo]

I run 40/500/20

 

[Mechanicos]

What do you guys think of 50/300/20K

 

[parcou]

What do you guys think of 50/300/20K

Good.... It helps keep the front down but still gives you good power on the launch.... play with your punch to find the sweet spot for your diffs setup.