Granite Aluminum or not

[Smokey Joe]

Is the quality of aluminum pieces good enough to reduce slop? I've seen poor quality aluminum and spent good money for the slop to be even worse that the oem parts. I see alot of buggies converting to aluminum does aluminum really tighten everything up for good hard speed runs? I put HR aluminum front end parts on my Granite and it still pulls left and right at speed. Any thoughts and tips let me know

 

[Robert C]

I used the hot racing pivot balls and it took most of the play out.

 

[Jerry-rigged]

Make sure the servo saver is not dragging on the chassis plate under the servo - mine was. I used a few washers to shim the servo up, and that helped steering tremendously.

 

[ssands85]

Also, toe settings will help. I feel like the toe is set way to far out from factory. Don’t want them pointed in at all though. Just a little bit less drastically wall eyed