Arrma Infraction driveshaft upgrades.

[StevenRC06]

Does anyone know if the RamJam center driveshafts are any good? How much power can they handle?

Also does anyone know if those cvds will actually fit in the rear?

 

[parcou]

Does anyone know if the RamJam center driveshafts are any good? How much power can they handle?

View attachment 333536
Also does anyone know if those cvds will actually fit in the rear?
View attachment 333537

Cheaper than M2C my thought for the price is to give them a try and see.

One concern with any aftermarket drive shaft when it is thicker it can be harder to get it driveshaft out past the center brace or some can even rub/touch the center brace.

 

[Diem Turner]

RamJam center spools have a good reputation so it's probably safe to assume these will do a good job as well. As for how much power they can handle...there's no specs regarding torque handling. The shafts themselves should handle anything you can throw at it. The weak spot (this affects almost all drive shafts with the exception of Scorched or PerfectPass Tridents) is the steep angle of the front bulkhead which causes adverse levels of friction on the front shaft pin. In a worst case scenario this can cause the pin to get welded to the front diff input cup or melt clean off. The latter will result in loss of drive to the front wheels which will also reduce braking power...which is bad because this is most likely to happen at high speeds.