Senton Arrma Senton Mega 4x4 Conversion

[JamesTech24]

I bought a Arrma Senton Mega 4x4. The original brushed motor is junk. I replaced it with a Onyx 3000kv brushless motor and esc. I am running a 2s lipo 5000mah 50c. I want to get some more speed. I understand the kv lower gives more torque not speed. What pinion and gear should i use? Should i program the esc differently as well? I also plan to start racing this as well. Thank you for any advice!

 

[Kla912000]

If you want more speed, just simply put in a 3s battery. 3s will greatly increase your speed over 2s.

 

[adambc82]

If you're running the stock mega slipper you don't want to run 3s. I put a 17t pinion in my granite with the same motor and mega slipper and it runs pretty quick. May have to search around for a good size for a senton though.

 

[Just Joe]

I got a senton mega brushed rig and put in a onyx 4000kv, I never ran the brushed motor though. The senton goes pretty good on 3s get a good amount of run times also.