Hobbywing ESC program update issue

[taugys]

Hello, so I have a hobby wing quic WP 8BL150 and LCD programming cars

So I’m trying do the firmware update, everytime I do it it’s just stuck on connecting ESC, I tied updating the programming card same thing happens, everything turns on fine and drive good with no issues, I tested the program card on2 different colleagues hobby wing ESC it worked just fine.

Has anyone else had this issue? If so how did you fix it? Or is this a sign of a bad ESC

 

[morrjr71]

According to Hobbywing, the LCD programming card is not compatible with that ESC: you need the LED programming card.

 

[taugys]

According to Hobbywing, the LCD programming card is not compatible with that ESC: you need the LED programming card.

Ahh gotcha well that makes sense, thank you so much!

 

[morrjr71]

Ahh gotcha well that makes sense, thank you so much!

I was in a similar situation as you are a few months ago. I Googled the issue, and I found a chart on the Hobbywing Direct web site that shows what programming cards work with what ESCs (link below).

https://support.hobbywingdirect.com...uide-What-programmers-will-work-with-each-ESC

 

[taugys]

I was in a similar situation as you are a few months ago. I Googled the issue, and I found a chart on the Hobbywing Direct web site that shows what programming cards work with what ESCs (link below).

https://support.hobbywingdirect.com...uide-What-programmers-will-work-with-each-ESC

Awesome I’m gonna save that, thank you so much!