Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Have you ran them big leopards??wanna try 1 for speed..never seen anyone try it..It will work, that leopard motor has different sized bullets though. IIRC it's 6mm and max 6 is 6.5mm. You will need to solder on some new ones or use an adapter.
Max6 should handle it fine..never tried running 4 pole big can for speed an don't think I've seen anyone run 1so I wanna try it...curious if the 4 poles have the torque of the 6 pole tp big cansI want to run it in my one off sledge. Never have current setup is max 6 combo. I wanna fit a goner motor in there for speed launch purposes
I have the same 5882 leopard the op is talking about. It's in my felony with an mmx8s and it's a nice motor. Definitely easier on the esc than a tp.Have you ran them big leopards??wanna try 1 for speed..never seen anyone try it..
I mean like going fast and launching rich duperbash type poopMax6 should handle it fine..never tried running 4 pole big can for speed an don't think I've seen anyone run 1so I wanna try it...curious if the 4 poles have the torque of the 6 pole tp big cans
Nice in excitedI have the same 5882 leopard the op is talking about. It's in my felony with an mmx8s and it's a nice motor. Definitely easier on the esc than a tp.
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!