Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Looking for ideas on different motor replacements for a Typhon 3s
Think 3050kv is the highest of the Hobbystar 3670's. It's a nice motor for sure ?I'd try that Hobbystar 3670 3200Kv motor @Rich Duperbash put in his Senton 3s BLX.
What pinion were you runnin on this? I grabbed a motor, and I'm ordering a max 10 sct today. I have a feeling some more broken parts are in my near future... ?Think 3050kv is the highest of the Hobbystar 3670's. It's a nice motor for sure ?
What pinion were you runnin on this? I grabbed a motor, and I'm ordering a max 10 sct today. I have a feeling some more broken parts are in my near future... ?
I have a Racerstar 3660 3800kv in my Granite. Decent motor for cheap.
Be aware that if you get a bigger motor, the stock ESC wont like it, and will probably overheat or fail.
Which truck is this going in?
I'm putting this in one of my Granites. I have the winged lwb one that I just put together that has the hw 3652 in it that just feels underpowered now. I'll probably drop it in there. I might then try the max 10 that came with the 3652 in the blx and see if it takes care of the cogging.
I'm thinking 3670 & max10 sct in the lwb, and then the max10 that came with the 3652 in the blx. The 3652 max10 is not the sct one, but I'm hoping it's a little better than the blx 100 esc.What esc are you running in the winged lwb Granite? Is it the Max10? If you move it to the BLX, what would you run to go with themthe 3670 motor?
I have a sneaky suspicion you're right about the max10, but I think it's worth a try. It would probably be smart to just pull the power module from the blx and try it in the lwb on max10 before I swap esc's. I have plenty of time since the SCT is at least a week out. I am excited that the max10 sct only cost me 10 bucks out of pocket. I had a ton of gas station reward points that got me some Amazon gift cards again. And most of the points were earned on a company gas card!
My .02-The Castle Mamba X is $144 while the HW Max10 SCT is $85. Putting price aside, which do you think would perform better in the 1/10 scale Arrma trucks? Or would you say they essentially perform the same with the exception of smoother starts and data logging for the Mamba X? Just curious.
you a math wizard or something.....impressive!!The stock Senton 3s BLX with the standard 20t pinion should top at around 55 mph. @Rich Duperbash is running Granite wheels so that would bump the stock setup to 66 mph. Going with a 3050kv motor and Granite wheels would put it at 63 mph. To get that setup down to 55 mph you would need a 17t (53 mph) or 18t (56 mph) pinion.
For the stock Granite/BRCC, the max speed is around 49 mph. Going 3050kv will lower it to 47 mph. Go with a 16t pinion to gain back the 2 mph.
Excel spreadsheets FTW...you a math wizard or something.....impressive!!
you a math wizard or something.....impressive!!
Excel spreadsheets FTW...
I'm still running the stock Senton 20T. Doing a rebuild on her and swapping in the HR motor mount, all sealed bearings, Tbone bumpers....etc.What pinion were you runnin on this? I grabbed a motor, and I'm ordering a max 10 sct today. I have a feeling some more broken parts are in my near future... ?
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!